BeygjuvélBluhm Systeme
e-SolarMark FL
Beygjuvél
Bluhm Systeme
e-SolarMark FL
föst verð aukaskattur bætist við
4.800 EUR
Ástand
Notað
Staðsetning
Borken 

Myndir sýna
Sýna kort
Upplýsingar um vélina
Verð og staðsetning
föst verð aukaskattur bætist við
4.800 EUR
- Staðsetning:
- Einsteinstraße 8a, 46325 Borken, DE

Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A14565049
- Tilvísunarnúmer:
- 23922
- Uppfærsla:
- síðast þann 15.11.2024
Lýsing
Bluhm Systeme marking lasers
Here we offer you a Bluhm Systeme marking laser.
Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested)
Introduction:
The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825
and EN 60825 (standards for end-user applications). It is designed to be
integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a protection class
product in accordance with the above-mentioned directives.
The e-SolarMark is a laser system for marking and engraving plastics,
metals and foils while stationary or in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. the marking unit with laser head (scanning head) with focusing lens.
2. the control unit contains the power supply unit, electronic control system and firmware
for the system function, I/O slots inside.
The e-SolarMark includes a fixed galvo scanning head equipped with a lens for
a square marking field with standard dimensions of 70 X 70 mm
Laser specification in standard version
Laser Type---Fiber Laser
Laser output power---FL2 model: 19W; typical
Wavelength---1062 nm typical
Internal Modulation---20 to 80 kHz
Scanner Head Description:
Scan Head---Two galvanometric mirror scanners with hard,
highly reflective dielectric coating.
F-Theta
Lens types and their characteristics:
Lens marking field 70x70 mm to 300 x 300 mm
Pjdoq Rtz Hopfx Aa Rsrc
Focus distance B 192 mm
Working environment Conditions:
Relative humidity up to 80% non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length marking/control unit 3 m
Weight marking unit 5 kg
Weight of control unit 15 kg
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption FL2 model 450W
Type: e-SolarMark FL
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Here we offer you a Bluhm Systeme marking laser.
Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested)
Introduction:
The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825
and EN 60825 (standards for end-user applications). It is designed to be
integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a protection class
product in accordance with the above-mentioned directives.
The e-SolarMark is a laser system for marking and engraving plastics,
metals and foils while stationary or in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. the marking unit with laser head (scanning head) with focusing lens.
2. the control unit contains the power supply unit, electronic control system and firmware
for the system function, I/O slots inside.
The e-SolarMark includes a fixed galvo scanning head equipped with a lens for
a square marking field with standard dimensions of 70 X 70 mm
Laser specification in standard version
Laser Type---Fiber Laser
Laser output power---FL2 model: 19W; typical
Wavelength---1062 nm typical
Internal Modulation---20 to 80 kHz
Scanner Head Description:
Scan Head---Two galvanometric mirror scanners with hard,
highly reflective dielectric coating.
F-Theta
Lens types and their characteristics:
Lens marking field 70x70 mm to 300 x 300 mm
Pjdoq Rtz Hopfx Aa Rsrc
Focus distance B 192 mm
Working environment Conditions:
Relative humidity up to 80% non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length marking/control unit 3 m
Weight marking unit 5 kg
Weight of control unit 15 kg
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption FL2 model 450W
Type: e-SolarMark FL
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Senda fyrirspurn
Sími & Fax
+49 2861 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp





















