þungur hilla4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
þungur hilla
4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
VB aukaskattur bætist við
1.490 EUR
Framleiðsluár
2024
Ástand
sýningavél
Staðsetning
Bad Feilnbach 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- þungur hilla
- Framleiðandi:
- 4 Stück Kragarmregal-Ständer einseitig
- Framleiðsluár:
- 2024
- Ástand:
- næstum eins og ný (sýningavél)
Verð og staðsetning
VB aukaskattur bætist við
1.490 EUR
- Staðsetning:
- Johann-Flitsch-Straße 8, 83075 Bad Feilnbach, Deutschland

Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A5776089
- Uppfærsla:
- síðast þann 28.01.2025
Lýsing
Cantilever rack in painted version (RAL 7016 anthracite):
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
Djdsguk A Hjpfx Afxeur
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
Djdsguk A Hjpfx Afxeur
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Senda fyrirspurn
Sími & Fax
+49 8064 ... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
Lítil auglýsing
Sierakowska Huta
2.343 km
Chipper Wood tætari
KOHLBACH THW-30/30
KOHLBACH THW-30/30
Lítil auglýsing
Bad Feilnbach
2.651 km
Cantilever rekki
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
Lítil auglýsing
Stary Dwór
2.425 km
Laukurflögnunarvél
ProdMaCB-80
ProdMaCB-80
Lítil auglýsing
Sindelfingen
2.447 km
Geymslulyfta
KardexShuttle XP-500-2450-813
KardexShuttle XP-500-2450-813
Lítil auglýsing
Grünkraut
2.563 km
Trommuhlífari/viðar tætari
S&F GmbHATH 300
S&F GmbHATH 300
Lítil auglýsing
Radeberg
2.428 km
Miðflótta dæla úr ryðfríu stáli Ryðfrítt stál dæla
KSBCPK-CM 250-315 / CPKN-C1 250-315
KSBCPK-CM 250-315 / CPKN-C1 250-315
Lítil auglýsing
Helmstedt
2.207 km
Stálbygging fyrir krana
no nameStahlkonstruktion fuer Krananlage
no nameStahlkonstruktion fuer Krananlage
Lítil auglýsing
Sigulda
2.458 km
Sentrífugu snúningsþurrkari
Alistar EuropeVSD500
Alistar EuropeVSD500
Lítil auglýsing
Bergatreute
2.557 km
Spónsög með heflaeiningu
HöferFSP 310
HöferFSP 310
Lítil auglýsing
Domaszék
3.132 km
MKT 100 Rúllanlegur söfnunarbakki með skynjara
Maurer GépMKT 100
Maurer GépMKT 100
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp










































































