Coil-lína4-High Cold Rolling Mill
- 200/650 × 650
Coil-lína
4-High Cold Rolling Mill
- 200/650 × 650
Ástand
Notað
(óprófað)
Staðsetning
Đakovo 

Grunnupplýsingar
- Heiti vélar:
- Coil-lína
- Framleiðandi:
- 4-High Cold Rolling Mill
- Gerð:
- - 200/650 × 650
- Ástand:
- tilbúinn til notkunar (notaður)
- Virkni:
- óprófað
Verð og staðsetning
- Staðsetning:
- Splitska 25 A, 31400 Đakovo, Croatia

Hringdu
Tæknilegar upplýsingar
Upplýsingar um afl
Inngangsspenna:
440 V
Inngangstíðni:
60 Hz
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A23354501
- Uppfærsla:
- síðast þann 18.11.2026
Lýsing
MACHINE DESCRIPTION
4-High Cold Rolling Mill designed for cold rolling of aluminium alloys and copper.
The mill is suitable for processing soft-annealed, tightly wound and pickled coils, offering precise thickness reduction and controlled rolling operations.
The equipment features a work roll drive system, mechanical screwdown adjustment, hydraulic roll bending, roll balancing, tension reels, entry and exit guiding equipment, thickness measurement and an emulsion-based coolant system.
1. BASIC MATERIAL SPECIFICATIONS
Machine type: 4-High Cold Rolling Mill
Mill designation: 200/650 × 650 mm
Suitable materials: Aluminium alloys A1100, A3003, A5002 and copper (Cu)
Material condition: Soft annealed, tightly wound coil and pickled
Maximum tensile strength: 85 kg/mm² (annealed)
Material thickness range: 0.05–3.0 mm
Material width: 400–600 mm
Coil inner diameter: Approx. 508 mm
Maximum coil outer diameter: 1,500 mm
Maximum coil weight: 5,000 kg
2. ROLLING MILL SPECIFICATIONS
Rolling mill configuration: 4-High (4HI)
Work roll diameter: 200 mm (specified range: 200–180 mm)
Backup roll diameter: 650 mm (specified range: 650–630 mm)
Roll barrel length: 650 mm
Additional roll dimensions stated: 720 mm / Ø200 × 740 mm (work roll); 720 mm (backup roll)
Rolling speed: 300 m/min (Step 1)
Gear transmission ratio: 3.5:1
Drive configuration: Work roll drive
3. MOTOR SPECIFICATIONS
Main mill drive: 300 kW; motor speed 0–1,500 / 1,500 rpm
Right tension reel: 110 kW; motor speed 0–500 / 2,000 rpm
Left tension reel: 90 kW; motor speed 0–400 / 1,600 rpm
4. SCREWDOWN SYSTEM
Mechanical screwdown system
AC motor drive: 7.5 kW
Motor voltage: 440 V
Encoder sensor included
Maximum separating force: 300 tons
5. WORK ROLL BENDING SYSTEM
Hydraulic roll bending device
Hydraulic pressure specification: 200 kg/cm²
Ijdpj Ak Dfgsfx Aatebd
Integrated roll balancing system
6. ENTRY GUIDE EQUIPMENT
Deflector roll, hold-down roll, tension pad, side guide and coolant oil spray equipment.
7. EXIT GUIDE EQUIPMENT
Air spray system, anti-rust deoiling pad, thickness gauge and deflector roll.
Thickness gauge specification: 1000:3 – 4.5 t (as stated in the original documentation).
8. ROLL ASSEMBLY
Roll balancing system, roll bending equipment and drum assemblies.
9. TENSION REEL SPECIFICATIONS
Right tension reel:
Drum diameter: 508–700 mm
Outer diameter: 1,200 mm
DC motor power: 110 kW
Tension capacity: 7 tons
Left tension reel:
Drum diameter: 508–700 mm
Outer diameter: 1,200 mm
DC motor power: 90 kW
Tension capacity: 7 tons
10. COOLANT SYSTEM
Emulsion oil type cooling system, coolant dirty tank and sump pump.
11. UTILITY REQUIREMENTS
Electrical power: 440 V, three-phase supply, 60 Hz
Specified power requirement: 500 kW
General hydraulic unit: tank capacity 400 litres; operating pressure specification 100 kg/cm²
Compressed air: continuous compressed air supply specified as 7 m³ in the original documentation (time basis not stated).
12. MAIN FEATURES
4-High rolling mill configuration
Suitable for aluminium alloys and copper
Material thickness range from 0.05 to 3.0 mm
Maximum processing width of 600 mm
Maximum coil weight of 5,000 kg
Rolling speed of 300 m/min
300 kW main mill motor
Mechanical screwdown system
Hydraulic work roll bending
Roll balancing system
Entry and exit guiding equipment
Thickness measurement equipment
Right and left tension reels
Emulsion oil coolant system
4-High Cold Rolling Mill designed for cold rolling of aluminium alloys and copper.
The mill is suitable for processing soft-annealed, tightly wound and pickled coils, offering precise thickness reduction and controlled rolling operations.
The equipment features a work roll drive system, mechanical screwdown adjustment, hydraulic roll bending, roll balancing, tension reels, entry and exit guiding equipment, thickness measurement and an emulsion-based coolant system.
1. BASIC MATERIAL SPECIFICATIONS
Machine type: 4-High Cold Rolling Mill
Mill designation: 200/650 × 650 mm
Suitable materials: Aluminium alloys A1100, A3003, A5002 and copper (Cu)
Material condition: Soft annealed, tightly wound coil and pickled
Maximum tensile strength: 85 kg/mm² (annealed)
Material thickness range: 0.05–3.0 mm
Material width: 400–600 mm
Coil inner diameter: Approx. 508 mm
Maximum coil outer diameter: 1,500 mm
Maximum coil weight: 5,000 kg
2. ROLLING MILL SPECIFICATIONS
Rolling mill configuration: 4-High (4HI)
Work roll diameter: 200 mm (specified range: 200–180 mm)
Backup roll diameter: 650 mm (specified range: 650–630 mm)
Roll barrel length: 650 mm
Additional roll dimensions stated: 720 mm / Ø200 × 740 mm (work roll); 720 mm (backup roll)
Rolling speed: 300 m/min (Step 1)
Gear transmission ratio: 3.5:1
Drive configuration: Work roll drive
3. MOTOR SPECIFICATIONS
Main mill drive: 300 kW; motor speed 0–1,500 / 1,500 rpm
Right tension reel: 110 kW; motor speed 0–500 / 2,000 rpm
Left tension reel: 90 kW; motor speed 0–400 / 1,600 rpm
4. SCREWDOWN SYSTEM
Mechanical screwdown system
AC motor drive: 7.5 kW
Motor voltage: 440 V
Encoder sensor included
Maximum separating force: 300 tons
5. WORK ROLL BENDING SYSTEM
Hydraulic roll bending device
Hydraulic pressure specification: 200 kg/cm²
Ijdpj Ak Dfgsfx Aatebd
Integrated roll balancing system
6. ENTRY GUIDE EQUIPMENT
Deflector roll, hold-down roll, tension pad, side guide and coolant oil spray equipment.
7. EXIT GUIDE EQUIPMENT
Air spray system, anti-rust deoiling pad, thickness gauge and deflector roll.
Thickness gauge specification: 1000:3 – 4.5 t (as stated in the original documentation).
8. ROLL ASSEMBLY
Roll balancing system, roll bending equipment and drum assemblies.
9. TENSION REEL SPECIFICATIONS
Right tension reel:
Drum diameter: 508–700 mm
Outer diameter: 1,200 mm
DC motor power: 110 kW
Tension capacity: 7 tons
Left tension reel:
Drum diameter: 508–700 mm
Outer diameter: 1,200 mm
DC motor power: 90 kW
Tension capacity: 7 tons
10. COOLANT SYSTEM
Emulsion oil type cooling system, coolant dirty tank and sump pump.
11. UTILITY REQUIREMENTS
Electrical power: 440 V, three-phase supply, 60 Hz
Specified power requirement: 500 kW
General hydraulic unit: tank capacity 400 litres; operating pressure specification 100 kg/cm²
Compressed air: continuous compressed air supply specified as 7 m³ in the original documentation (time basis not stated).
12. MAIN FEATURES
4-High rolling mill configuration
Suitable for aluminium alloys and copper
Material thickness range from 0.05 to 3.0 mm
Maximum processing width of 600 mm
Maximum coil weight of 5,000 kg
Rolling speed of 300 m/min
300 kW main mill motor
Mechanical screwdown system
Hydraulic work roll bending
Roll balancing system
Entry and exit guiding equipment
Thickness measurement equipment
Right and left tension reels
Emulsion oil coolant system
Senda fyrirspurn
Sími & Fax
+385 31 7... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp


