GluggasamsetningarstöðBeck Maschinebau
Gluggasamsetningarstöð
Beck Maschinebau
EXW VB aukaskattur bætist við
14.400 EUR
Framleiðsluár
2026
Ástand
Nýtt
(fullkomlega virkur)
Staðsetning
Krauchenwies 

Upplýsingar um vélina
- Heiti vélar:
- Gluggasamsetningarstöð
- Framleiðandi:
- Beck Maschinebau
- Vélar númer:
- 02-2026
- Framleiðsluár:
- 2026
- Ástand:
- nýtt
- Virkni:
- fullkomlega virkur
- Vinnustundir:
- 1 h
Verð og staðsetning
EXW VB aukaskattur bætist við
14.400 EUR
- Staðsetning:
- Im Grund 23, 72505 Krauchenwies - Bittelschieß, Deutschland

Hringdu
Tæknilegar upplýsingar
- Heildarbreidd:
- 2.100 mm
- Heildarlengd:
- 2.100 mm
- Heildarhæð:
- 900 mm
- Heildarþyngd:
- 1.000 kg
- Rekstrarþrýstingur:
- 60 stöng
- Borðhæð:
- 770 mm
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A22616077
- Tilvísunarnúmer:
- Arbeits und Wendetisch
- Uppfærsla:
- síðast þann 25.08.2026
Lýsing
Work table with pivoting mechanism AWT-250 S – easily bring components to the desired working height with head pressure, without any force, and tilt and rotate them using the integrated pivoting mechanism.
Design: electro-hydraulic, Schuko plug 230V, controlled via hand buttons for up/down, lifting – lowering – pivoting.
Mounting and pivoting of large and bulky panels, frame parts, and large workpieces can be handled by one person. Max. component size 4000x3000mm, load capacity 250 kg.
Working height can be continuously adjusted from approximately 770-1000mm, and the useful stroke is 230mm vertically.
The center support is 160mm wide and has 2 movable infeed/outfeed rollers on each side, which are automatically retracted at the top and extended at the bottom.
Lrjdpfezwhaqsx Ahysr
The 2 tiltable work surfaces are WxD: 950x2000mm, plus 3 pull-out extensions of +500mm on each side.
The total horizontal working area is 2100 x 2000mm; the support surfaces are equipped with brush strips for gentle workpiece processing.
In the folded position, the open angle is approximately 32° vertically.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Design: electro-hydraulic, Schuko plug 230V, controlled via hand buttons for up/down, lifting – lowering – pivoting.
Mounting and pivoting of large and bulky panels, frame parts, and large workpieces can be handled by one person. Max. component size 4000x3000mm, load capacity 250 kg.
Working height can be continuously adjusted from approximately 770-1000mm, and the useful stroke is 230mm vertically.
The center support is 160mm wide and has 2 movable infeed/outfeed rollers on each side, which are automatically retracted at the top and extended at the bottom.
Lrjdpfezwhaqsx Ahysr
The 2 tiltable work surfaces are WxD: 950x2000mm, plus 3 pull-out extensions of +500mm on each side.
The total horizontal working area is 2100 x 2000mm; the support surfaces are equipped with brush strips for gentle workpiece processing.
In the folded position, the open angle is approximately 32° vertically.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2010
46 Auglýsingar á netinu
Senda fyrirspurn
Sími & Fax
+49 7576 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp




























