BurstahreinsunarvélBoschert
K 3
Burstahreinsunarvél
Boschert
K 3
framleiðsluár
2024
Ástand
sýningavél
Staðsetning
Setzingen 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Burstahreinsunarvél
- framleiðandi:
- Boschert
- Gerð:
- K 3
- framleiðsluár:
- 2024
- Ástand:
- næstum eins og ný (sýningavél)
Verð og staðsetning
- Staðsetning:
- Obstgärten 7, 89129 Setzingen, DE
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A16210471
- Tilvísunarnúmer:
- 8039
- uppfærsla:
- síðast þann 05.12.2024
Lýsing
Boschert brush deburring machine model K3
for deburring straight sheet edges and on the lateral aggragate
suitable for cut-outs and notches up to 70 mm deep as well as
outer radii on sheet metal.
3 motors á 1,5 kW
brush diameter : 300 mm
Material: wire brushes VA/steel
Material range: 0.8-8 mm thickness
Machine dimensions:
Dcodstr Aviopfx Agwen
Width: 1400 mm
Height: 580 mm
Depth: 670 mm
Underframe: 800 mm high (working height 920 mm)
Table support: 200x1400 mm
Hold-down device as sheet guide
The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top.
The 3rd (lateral) unit is for deburring external contours and is switched on separately.
A larger lateral table support serves as a shelf
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
for deburring straight sheet edges and on the lateral aggragate
suitable for cut-outs and notches up to 70 mm deep as well as
outer radii on sheet metal.
3 motors á 1,5 kW
brush diameter : 300 mm
Material: wire brushes VA/steel
Material range: 0.8-8 mm thickness
Machine dimensions:
Dcodstr Aviopfx Agwen
Width: 1400 mm
Height: 580 mm
Depth: 670 mm
Underframe: 800 mm high (working height 920 mm)
Table support: 200x1400 mm
Hold-down device as sheet guide
The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top.
The 3rd (lateral) unit is for deburring external contours and is switched on separately.
A larger lateral table support serves as a shelf
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2014
Senda fyrirspurn
Sími & Fax
+49 7345 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp