KantarvélBRANDT
KDF 660 GC
Grunnupplýsingar
Tæknilegar upplýsingar
Áss upplýsingar
Frekari upplýsingar
veiting
- Staðsetning:
- Piemonte, Ítalía
– Fjarlægð: um 2.792 km
- Aðgengi:
- strax eftir að uppboði lýkur
- Afhendingarskilmálar:
- FCA
1.500,00 EUR (bindandi)
ókeypis
Lýsing
TECHNICAL DETAILS
Feed rate: max. 18 m/min
Panel thickness: min. 10 mm
Panel thickness: max. 60 mm
Panel width: min. 70 mm
Edge thickness: min. 0.4 mm
Edge thickness: max. 12 mm
Number of processing units: 9
Pre-milling unit
Number of units: 1
Motor power: 2.2 kW
Edge magazine and gluing unit
Number of magazine positions: 1
Number of pressure rollers: 4
Edge processing units
Number of edge processing units: 7
End trimming unit
Number of motors: 2
Motor power per motor: 0.35 kW
Flush trimming and rounding unit
Number of motors: 2
Motor power per motor: 0.55 kW
Corner rounding unit
Number of motors: 2
Motor power per motor: 0.35 kW
Grooving unit
Number of motors: 1
Motor power: 3.5 kW
Buffing unit
Number of motors: 2
Motor power per motor: 0.18 kW
MACHINE DETAILS
Total connected load: 22 kW
EQUIPMENT
Thin-edge processing
Thick-edge processing
Solid wood edge processing
EVA hot-melt adhesive system
AIRTEK hot-air system
Top pressure beam with idler rollers
Panel support guides
Pre-milling unit with automatic, time-controlled engagement
Edge roll magazine
EVA glue pot
EVA pre-melter
Set of pressure rollers with 4 pressure rollers
NC positioning of the pressure rollers
End trimming unit
Flush trimming and rounding unit with NC positioning
WD60 corner rounding unit
Grooving unit
Edge scraping unit with NC positioning
Glue scraping unit
Buffing unit
Spraying unit
PowerControl PC20 machine programming software
CE marking
The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods before collection and assumes responsibility for installing, securing and using the machine at the destination.
External reference: 7517
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Greiðsla meðhöndlun
- Aukakostnaður við kaup:
- 18 %
- Greiðsluskilmálar:
- 100 % fyrirframgreiðsla
- Greiðslumáti:
Bankafærslu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A23304297
- Tilvísunarnúmer:
- AUC-2611337
- Uppfærsla:
- síðast þann 10.11.2026
- Einkar tilboð:
- aðeins í boði á uppboði
skoðun
Piemonte PACKSIZEFM 6
Piemonte SELCOWNA 610 TWIN PUSHER
Piemonte BRANDTKDF 350 C
Piemonte STEFANIPERFORMANCE SB
Piemonte IMACOMBIFORM K I R75 1035 V R3
Piemonte BIESSEROVER G 714
Piemonte SELCOEBTR 120 TWIN PUSHER
Piemonte DMCUNISAND K-I
Piemonte BIESSEROVER C 6.40
Piemonte BIESSEAKRON 1330
Piemonte BIESSESKIPPER 130
Piemonte HOMAGKAL 310/7/A20/S2
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-traustmerki
Hvað er traustvottorð?
Machineseeker vottar valda söluaðila með traustsvottun Machineseeker. Áður en úthlutað er framkvæma reyndir starfsmenn Machineseeker staðlaða og yfirgripsmikla skoðun.
Hvað skoðum við?
Staðfesting á
rekstrarleyfi eða útdrætti úr firmaskrá
Yfirferð á
póstfangi seljanda
Staðfesting á
bankatengingu
Staðfesting á
símalegu
aðgengi að aðalnúmerinu
Efnahagsupplýsingar
mega ekki innihalda neikvæða eiginleika
Kaupendur kvartanir
geta leitt til þess að vottunin verði afturkölluðHvað þýðir þetta fyrir þig sem kaupanda?
Með Machineseeker-traustmerkinu getur þú sem kaupandi þekkt áreiðanlega seljendur, jafnvel án eigin athugunar, sem líklega stunda heiðarlega og réttláta viðskiptahætti.
Auðvitað geta samt sem áður orðið ágreiningar á meðan á kaupferlinu stendur. Machineseeker ber ekki ábyrgð á brotum á lögum sem virkir kaupendur eða seljendur á Machineseeker kunna að fremja.