CTS hitastigssjokksprófunarskápar TSS-70/130 Heitt: +50°C til +200°C Kalt: -80°C til +100°C 130L

CTS TSS-70/130

CTS

Type: TSS-70/130
Water-cooled cooling unit

For sale is a high-quality temperature shock test chamber from CTS
(Clima Temperatur Systeme), model TSS-70/130.
The device is used for performing temperature shock tests
and is typically used in industry, research, and quality assurance.

Application areas:
Material tests
Aging tests
Electronics and component tests
Temperature shock and cyclic temperature tests

Technical data:
Type: TSS-70/130
Test volume: 130 liters

Temperature range:
Hot chamber: +50°C to +200°C
Cold chamber: -80°C to +100°C
Heating rate: approx. 6 K/min from room temperature to +180°C
Cooling rate: approx. 4 K/min from room temperature to -60°C

Temperature deviation:
±1 K in time
±2 K spatially

Temperature change rate:
max. 100 K/min on average for shock test tests
without heat input

Temperature adjustment rate:
≤ 15 min in the range of -65°C to +200°C
with 10 kg of ICs

Cycle time:
< 10 seconds

Electrical data:
Connection: 400 V, 3/N, 50 Hz
Rated power: approx. 17.2 kW
Godpoy Hkd Hefx Apysuh
Rated current: approx. 29 A
On-site protection: 32 A slow-blow fuse
Connection: Cekon 32

Refrigeration system:
Refrigerant: R404A / R23
water-cooled, low-noise, fully hermetic

Equipment / Features:
CTS control panel
Microprocessor-controlled control and monitoring system
Program operation
up to 100 test programs possible
digital setpoint and actual value display
RS232 interface
2 free switching channels for on-site control of the test specimen
Fault message on potential-free contact
Load up to 30 V DC, 2 A
EMC tested

Technical design:
Hot and cold chamber
Mobile frame with lifting spindle drive
Test chamber / mobile frame made of stainless steel, material no. 1.4301
Insert basket made of stainless steel wire
Pipe passage NW 50 with sealing plug
Compressed air connection 1/4" AG
Condensate drain non-pressurized R 1/2" internal thread
Safety door lock
lockable door with window

Dimensions according to installation diagram:
External dimensions approx.: 2335 x 940 x 1820 mm
Loading dimension approx.: 1990 x 940 x 1652 mm
Test chamber dimensions: height approx. 410 mm
Width approx. 480 mm, depth approx. 660 mm
Window: 300 x 300 mm

Other data:
Protection class: IP 22
Sound pressure level: < 60 dB(A)
Weight: approx. 950 kg
Average consumption during test cycle: approx. 8 kWh

For your safety as a buyer, the following information:
The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, refill with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.

Condition: used

Scope of delivery: see pictures

(Changes and errors in technical data are subject to change!)

We will gladly answer any further questions you may have by telephone.

Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.