Styrktarflokkunarvél C24 (C40) og TR26Dynalyse
Dynagrade
Styrktarflokkunarvél C24 (C40) og TR26
Dynalyse
Dynagrade
EXW föst verð aukaskattur bætist við
16.000 EUR
Ástand
Notað
Staðsetning
Kalme 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Styrktarflokkunarvél C24 (C40) og TR26
- framleiðandi:
- Dynalyse
- Gerð:
- Dynagrade
- Vélar númer:
- 057
- Ástand:
- mjög gott (notað)
- virkni:
- fullkomlega virkur
Verð og staðsetning
EXW föst verð aukaskattur bætist við
16.000 EUR
- Staðsetning:
- Kasumetsa tee, Kalme, 61002 Tartu maakond, Estonia
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A17542298
- uppfærsla:
- síðast þann 09.05.2025
Lýsing
New price ca 100 000.- EUR
The Dynagrade equipment is a product for on-line strength grading of structural
timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market
Kdsdpfx Asu Dnf Iefwou
.
It is especially suitable for installation in sawmill sorting lines or planing
mills or comparable plants where sawn (or planed) timber is transported by means
of an existing cross-conveyor system.
The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones).
Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m).
Main prerequisites:
Limber/timber size and length 1):
Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm
Sawn or planed surface
Dried lumber/timber, cut to angle
Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)
The Dynagrade equipment is a product for on-line strength grading of structural
timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market
Kdsdpfx Asu Dnf Iefwou
.
It is especially suitable for installation in sawmill sorting lines or planing
mills or comparable plants where sawn (or planed) timber is transported by means
of an existing cross-conveyor system.
The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones).
Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m).
Main prerequisites:
Limber/timber size and length 1):
Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm
Sawn or planed surface
Dried lumber/timber, cut to angle
Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2024
Senda fyrirspurn
Sími & Fax
+372 510 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp