CNC beygja-fræsa miðstöðEMCO
Hyperturn 690MC (TCMY) Plus
Upplýsingar um vélina
- Heiti vélar:
- CNC beygja-fræsa miðstöð
- Framleiðandi:
- EMCO
- Framleiðsluár:
- 2005
- Ástand:
- almennt endurnýjaður (notaður)
- Virkni:
- fullkomlega virkur
Tæknilegar upplýsingar
- Rúnlengd:
- 1.500 mm
- Snúningsþvermál:
- 520 mm
- Spindilhraði (hámark):
- 3.200 snúningur/mín.
- X-áss færi:
- 280 mm
- Förfaravegalengd Z-áss:
- 1.055 mm
- Hlutþyngd (mesta.):
- 1.200 kg
veiting
- Staðsetning:
- Hlavní město Praha, Tékkneska lýðveldið
– Fjarlægð: um 2.549 km
- Aðgengi:
- strax eftir að uppboði lýkur
- Afhendingarskilmálar:
- FCA
ókeypis
ókeypis
Lýsing
TECHNICAL DETAILS
Swing diameter over bed: 700 mm
Max. turning diameter: 520 mm
Spindle distance: 1,500 mm
Travel X1: 280 mm
Travel Z1: 1,055 mm
Travel Z2: 1,090 mm
Control system: Siemens Sinumerik 840D
Main spindle
Spindle head: DIN 55026 A2-8
Passage through the drawbar: 95 mm
Inner diameter of front bearing: 160 mm
Inner diameter of rear bearing: 150 mm
Diameter of clamping cylinder: 315 mm
Speed: 750–3,200 rpm
Power (S1/S6 40%): 37/54 kW
Max. torque (S1/S6 40%): 470/687 Nm
Max. workpiece weight in the chuck: 400 kg
Center of gravity distance from chuck: 175 mm
Max. workpiece weight between chuck and tailstock: 1,200 kg
Counter spindle
Spindle head: DIN 55026 A2-8
Passage through the drawbar: 95 mm
Inner diameter of front bearing: 160 mm
Inner diameter of rear bearing: 150 mm
Diameter of clamping cylinder: 315 mm
Speed: 500–3,200 rpm
Power (S1/S6 40%): 17/25 kW
Max. torque (S1/S6 40%): 324/478 Nm
tailstock
Travel: 1,050 mm
Min./Max. distance between spindle and tailstock: 320–1,370 mm
Min./Max. feed force: 50–2,000 daN
Spindle taper: MK 5
feeds
Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min
Ball screw X1-X2, pitch: 40 x 20 mm
Ball screw Z1-Z2, pitch: 50 x 20 mm
Ball screw counter spindle, pitch: 50 x 20 mm
Feed force X1-X2: 1,640 daN
Feed force Z1-Z2: 1,640 daN
Feed force counter spindle: 1,640 daN
General overhaul and maintenance
- Replacement of the X-axis ball screw (upper turret): 2011
- Replacement of the clamping cylinder (spindle no. 1): approx. 2018
- Replacement of the bearings of both spindles: 2011
- Overhaul of both revolvers: ongoing
EQUIPMENT
- Counter spindle
- 2 revolvers with driven tools
- Y-axis of the upper turret: start at 50 mm
- Driven tools: 2 straight + 2 angled
- Holder: 2 in the hole + 2 on the surface
- Clamping jaws: 2x hard base jaws
- Complete documentation for the machine
- Replacement turret (after complete overhaul)
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Greiðsla meðhöndlun
- Aukakostnaður við kaup:
- 18 %
- Greiðsluskilmálar:
- 100 % fyrirframgreiðsla
- Greiðslumáti:
Bankafærslu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A18658671
- Tilvísunarnúmer:
- AUC-2503017
- Uppfærsla:
- síðast þann 24.03.2025
- Einkar tilboð:
- aðeins í boði á uppboði
skoðun
Leutkirch im Allgäu LiebherrLC 1502
Þýskaland EmcoTurn 365 TCmy
Þýskaland Niles-SimmonsN30/2500 MC
Kirchheim unter Teck KELLENBERGERUR175-600 BEMA STEP
Austurríki EMCOE45
Ciriè EMANUELDEA 400/2000
Hochdorf SingleChill Plus Testing CHT-130
Częstochowa CNC INFOTEC BearbeitungszentrumModell: 2515
Röthenbach an der Pegnitz WEILERPrimus Leit- und Zugspindeldrehmaschinen
Bad Oeynhausen HankookVTC-200E
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-traustmerki
Hvað er traustvottorð?
Machineseeker vottar valda söluaðila með traustsvottun Machineseeker. Áður en úthlutað er framkvæma reyndir starfsmenn Machineseeker staðlaða og yfirgripsmikla skoðun.
Hvað skoðum við?
Staðfesting á
rekstrarleyfi eða útdrætti úr firmaskrá
Yfirferð á
póstfangi seljanda
Staðfesting á
bankatengingu
Staðfesting á
símalegu
aðgengi að aðalnúmerinu
Efnahagsupplýsingar
mega ekki innihalda neikvæða eiginleika
Kaupendur kvartanir
geta leitt til þess að vottunin verði afturkölluðHvað þýðir þetta fyrir þig sem kaupanda?
Með Machineseeker-traustmerkinu getur þú sem kaupandi þekkt áreiðanlega seljendur, jafnvel án eigin athugunar, sem líklega stunda heiðarlega og réttláta viðskiptahætti.
Auðvitað geta samt sem áður orðið ágreiningar á meðan á kaupferlinu stendur. Machineseeker ber ekki ábyrgð á brotum á lögum sem virkir kaupendur eða seljendur á Machineseeker kunna að fremja.