Vinnuplattform hálfvagnES-GE
3-Achs Sattelanhänger - Bordwände + CV
Vinnuplattform hálfvagn
ES-GE
3-Achs Sattelanhänger - Bordwände + CV
Ástand
Nýtt
Staðsetning
Essen 

Grunnupplýsingar
Verð og staðsetning
- Seljanda staðsetning:
- Heegstraße 6-8, 45356 Essen, Þýskaland

Hringdu
Tæknilegar upplýsingar
Mál og þyngd
Heildarþyngd:
39.000 kg
Hámarks burðargeta:
32.340 kg
Öxlar og hjól
Öxlastilling:
3 ása
Öryggiseiginleikar
ABS
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A23360780
- Tilvísunarnúmer:
- 36242
- Uppfærsla:
- síðast þann 20.11.2026
Lýsing
You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request.
Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
Fifth Wheel: 2-inch kingpin.
Underrun Protection: Bolted design, compliant with EC regulations.
Side Underrun Protection: Compliant with EC regulations.
Landing Gears: 2 x 12 t landing gears with leveling foot and single-sided operation on the front right.
Axles: 3 x 9 t air suspension axle assemblies, disc brakes, manufactured by SAF, with disc brakes of approximately 430x45 mm, ABS, wheel mounting centered with 10 holes and an offset of 120, total suspension travel of approximately 200 mm, including lifting of approximately 140 mm and lowering of approximately 60 mm, controlled via rotary slide valve with detent function.
Braking System: Two-circuit compressed air braking system compliant with EC regulations, with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the towing vehicle.
Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5, offset 120, manufacturer of our choice.
Fenders: Compliant with EC regulations, PVC fenders in front of and behind the axle assembly.
Spare Wheel Holder: 1 double cradle with mounting hardware for a spare wheel with an offset of 120.
Load Securing: - 9 pairs of foldable lashing rings, evenly distributed, tensile force approximately 8.0 t. - 8 pairs of foldable lashing rings, evenly distributed, tensile force approximately 2.5 t. - A hole for lashing straps is provided approximately every 500 mm in the outer frame.
Front Wall: Reinforced steel construction, fixed. Internally lined with approximately 9 mm screen-printed board (approximately 1,250 mm high).
Floor: Approximately 28 mm Z-hardwood flooring recessed in the outer frame.
Lighting System: Compliant with EC regulations, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. 1x15- and 2x7-pin connectors on the front crossmember.
Equipment: - 2 wheel chocks with bracket. - Warning sign ECE 70. - Bracket for rotating beacon (without rotating beacon).
Paintwork: Chassis and front wall sandblasted, primed, and single-color top-coated.
Isde Ak Skpepfx Ad Sjtp
Chassis: RAL 3002 carmine red.
Side Walls: Anodized.
Side Wall Profiles: RAL 3002 carmine red.
Hubs: KTL (cathodic electrodeposition).
Rims: Silver.
SSV (Steering System Valve): Aluminum, anodized.
Underrun Protection: White (RAL 9010).
Components: Galvanized/KTL black.
Contour Marking: Compliant with EC regulations, yellow on the sides and rear with ES-GE logo.
Including accessories.
First axle can be lifted, with fully automatic, load-dependent lift control.
10 pairs of pocket slots in the outer frame, evenly distributed.
4 rows of pocket slots transverse to the loading area.
20 pieces of stanchions made of galvanized tube 80/50, total length approximately 1,000 mm.
Internally, a magazine for 20 pieces of plug-in stanchions on the front wall.
5 x 25 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions.
Side
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
Fifth Wheel: 2-inch kingpin.
Underrun Protection: Bolted design, compliant with EC regulations.
Side Underrun Protection: Compliant with EC regulations.
Landing Gears: 2 x 12 t landing gears with leveling foot and single-sided operation on the front right.
Axles: 3 x 9 t air suspension axle assemblies, disc brakes, manufactured by SAF, with disc brakes of approximately 430x45 mm, ABS, wheel mounting centered with 10 holes and an offset of 120, total suspension travel of approximately 200 mm, including lifting of approximately 140 mm and lowering of approximately 60 mm, controlled via rotary slide valve with detent function.
Braking System: Two-circuit compressed air braking system compliant with EC regulations, with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the towing vehicle.
Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5, offset 120, manufacturer of our choice.
Fenders: Compliant with EC regulations, PVC fenders in front of and behind the axle assembly.
Spare Wheel Holder: 1 double cradle with mounting hardware for a spare wheel with an offset of 120.
Load Securing: - 9 pairs of foldable lashing rings, evenly distributed, tensile force approximately 8.0 t. - 8 pairs of foldable lashing rings, evenly distributed, tensile force approximately 2.5 t. - A hole for lashing straps is provided approximately every 500 mm in the outer frame.
Front Wall: Reinforced steel construction, fixed. Internally lined with approximately 9 mm screen-printed board (approximately 1,250 mm high).
Floor: Approximately 28 mm Z-hardwood flooring recessed in the outer frame.
Lighting System: Compliant with EC regulations, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. 1x15- and 2x7-pin connectors on the front crossmember.
Equipment: - 2 wheel chocks with bracket. - Warning sign ECE 70. - Bracket for rotating beacon (without rotating beacon).
Paintwork: Chassis and front wall sandblasted, primed, and single-color top-coated.
Isde Ak Skpepfx Ad Sjtp
Chassis: RAL 3002 carmine red.
Side Walls: Anodized.
Side Wall Profiles: RAL 3002 carmine red.
Hubs: KTL (cathodic electrodeposition).
Rims: Silver.
SSV (Steering System Valve): Aluminum, anodized.
Underrun Protection: White (RAL 9010).
Components: Galvanized/KTL black.
Contour Marking: Compliant with EC regulations, yellow on the sides and rear with ES-GE logo.
Including accessories.
First axle can be lifted, with fully automatic, load-dependent lift control.
10 pairs of pocket slots in the outer frame, evenly distributed.
4 rows of pocket slots transverse to the loading area.
20 pieces of stanchions made of galvanized tube 80/50, total length approximately 1,000 mm.
Internally, a magazine for 20 pieces of plug-in stanchions on the front wall.
5 x 25 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions.
Side
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2003
59 Auglýsingar á netinu
Senda fyrirspurn
Sími & Fax
+49 201 8... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Essen
2.109 km
Vinnuplattform hálfvagn
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp












