Vinnuplattform hálfvagnFAYMONVILLE
Doppeltele, MAX Trailer MAX210 Telesattel
Vinnuplattform hálfvagn
FAYMONVILLE
Doppeltele, MAX Trailer MAX210 Telesattel
föst verð aukaskattur bætist við
98.900 EUR
Ástand
Notað
Staðsetning
Essen 

Myndir sýna
Sýna kort
Upplýsingar um vélina
Verð og staðsetning
föst verð aukaskattur bætist við
98.900 EUR
- Seljanda staðsetning:
- Heegstraße 6-8, 45356 Essen, Þýskaland
Hringdu
Tæknilegar upplýsingar
- Heildarþyngd:
- 48.000 kg
- Hámarks burðargeta:
- 36.300 kg
- Öxlastilling:
- 3 ása
- Fyrsta skráning:
- 08/2024
- Næsta skoðun (TÜV):
- 08/2025
- Heildarbreidd:
- 2.540 mm
- Búnaður:
- ABS
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A12865280
- Tilvísunarnúmer:
- 31536
- uppfærsla:
- síðast þann 29.08.2025
Lýsing
You can find our complete range of vehicles, including those available immediately and at short notice, on our website.
Excerpt from the equipment. Full equipment details available upon request.
- Load area in a double-extendable version with pneumatically operated locking mechanism
- A fixed intermediate table, approx. 250 mm wide, mounted on the central beam
- BPW axles and suspension, all axles hydro-mechanically forced-steered
- Air suspension with lift and lower valve
- Tyres: 385/65 R 22.5
- JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
- Braking system according to EU regulations with EBS-E (2S2M)
- Disc brakes
- 2-inch kingpin
Hfedpfspkx Eaex Adksn
- Electro-hydraulic unit
- Remote steering from the front and rear via cable remote control
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area
- Load gauge for axle load determination, including load diagram
- A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- 6 pairs of WADER container locks embedded in the load area, for 1 x 20' container, 2 x 20' containers or 1 x 40' container. An additional locking point is provided in the extension for a 45' container
- 5 pairs of crosswise mounted stake pocket strips in the load area
- Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall
- One tool box INOX, approx. 1,200 x 460 x 550 mm, mounted at the front under the load area on the left and right
- Central lubrication system with 2 BEKAMAX pumps (Pico)
- 2 LED reversing lights mounted on the rear panel
- Acoustic warning signal when reversing
- Collision protection left and right on the rear crossmember
- 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
- HRM metallization (High Resistance Metallisation)
- Single-colour paintwork in RAL 3002 carmine red
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Excerpt from the equipment. Full equipment details available upon request.
- Load area in a double-extendable version with pneumatically operated locking mechanism
- A fixed intermediate table, approx. 250 mm wide, mounted on the central beam
- BPW axles and suspension, all axles hydro-mechanically forced-steered
- Air suspension with lift and lower valve
- Tyres: 385/65 R 22.5
- JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
- Braking system according to EU regulations with EBS-E (2S2M)
- Disc brakes
- 2-inch kingpin
Hfedpfspkx Eaex Adksn
- Electro-hydraulic unit
- Remote steering from the front and rear via cable remote control
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area
- Load gauge for axle load determination, including load diagram
- A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- 6 pairs of WADER container locks embedded in the load area, for 1 x 20' container, 2 x 20' containers or 1 x 40' container. An additional locking point is provided in the extension for a 45' container
- 5 pairs of crosswise mounted stake pocket strips in the load area
- Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall
- One tool box INOX, approx. 1,200 x 460 x 550 mm, mounted at the front under the load area on the left and right
- Central lubrication system with 2 BEKAMAX pumps (Pico)
- 2 LED reversing lights mounted on the rear panel
- Acoustic warning signal when reversing
- Collision protection left and right on the rear crossmember
- 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
- HRM metallization (High Resistance Metallisation)
- Single-colour paintwork in RAL 3002 carmine red
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2003
Senda fyrirspurn
Sími & Fax
+49 201 8... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp