Vinnuplattform hálfvagnFAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
 Vinnuplattform hálfvagn
FAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
                                                     föst verð aukaskattur bætist við                                            
                                            49.750 EUR                                    
            Ástand        
            Notað                    
            Staðsetning        
                                                Essen                                            

 Myndir sýna            
 Sýna kort            
Upplýsingar um vélina
Verð og staðsetning
                             föst verð aukaskattur bætist við                    
                            49.750 EUR                    
- Seljanda staðsetning:
-     Heegstraße 6-8, 45356 Essen, Þýskaland             
 Hringdu            
Tæknilegar upplýsingar
- Hámarks burðargeta:
- 38.390 kg
- Heildarþyngd:
- 48.000 kg
- Öxlastilling:
- 3 ása
- Fyrsta skráning:
- 03/2024
- Næsta skoðun (TÜV):
- 03/2026
- Heildarbreidd:
- 2.540 mm
- Búnaður:
- ABS
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A20421315
- Tilvísunarnúmer:
- 33271
- Uppfærsla:
- síðast þann 31.10.2025
Lýsing
        You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
Rsdpfxoxth Ads Afloch
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
Rsdpfxoxth Ads Afloch
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
            Athugasemd:        Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.    
Skráð frá: 2003
Senda fyrirspurn
Sími & Fax
                            +49 201 8... auglýsingar                
            Auglýsingunni þinni hefur verið eytt með góðum árangri            
            Villa kom upp            
















