TippvagnFLIEGL
3-Achs Sattelkipper Alu 57 cbm
Tippvagn
FLIEGL
3-Achs Sattelkipper Alu 57 cbm
EXW föst verð aukaskattur bætist við
28.900 EUR
framleiðsluár
2021
Ástand
Notað
Staðsetning
Triptis 

Myndir sýna
Sýna kort
Verð og staðsetning
EXW föst verð aukaskattur bætist við
28.900 EUR
- Staðsetning:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE
- leiga:
- mögulegt
Hringdu
Tæknilegar upplýsingar
- Heildarþyngd:
- 38.000 kg
- Tómass:
- 4.983 kg
- Hámarks burðargeta:
- 33.017 kg
- Hleðslurýmisrúmmál:
- 57 m³
- Fyrsta skráning:
- 10/2021
- Fjöðrun:
- loft
- Litur:
- hvítt
- Dekkjastærð:
- 385/65 R22.5"
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A19490881
- Tilvísunarnúmer:
- 63776
- uppfærsla:
- síðast þann 28.07.2025
Lýsing
Hydraulics
Low-pressure cylinder max. 170 bar, smallest section hard-chromed, with HDK screw coupling, fixed component, nominal width 48 mm (without hose connection). Supplied loose!
Operation hydraulically via truck PTO
Bodies
Aluminum box body made of high-quality, wear-resistant material. Slanted front wall 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, neatly welded, with top rail profile designed to prevent bulk material deposits. Interior features a ladder at the front wall (not in combination with Cramaro).
Shovel and broom holder mounted externally on the front wall.
Greenline – conical and aerodynamic body design
"Membrane" rear wall
Rear wall suspended with "double-joint hinge" and split 1/2 to 1/2 with two-leaf doors, equipped with swing arms at the top, and one grain chute per door.
Rear wall with rubber seal
Note! Heat resistant up to max. 170°C!
Continuously 6 mm thick floor
Standing platform with access ladder
Prepared for tarpaulin cover
Hfjdpfjww Icbsx Adksn
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Low-pressure cylinder max. 170 bar, smallest section hard-chromed, with HDK screw coupling, fixed component, nominal width 48 mm (without hose connection). Supplied loose!
Operation hydraulically via truck PTO
Bodies
Aluminum box body made of high-quality, wear-resistant material. Slanted front wall 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, neatly welded, with top rail profile designed to prevent bulk material deposits. Interior features a ladder at the front wall (not in combination with Cramaro).
Shovel and broom holder mounted externally on the front wall.
Greenline – conical and aerodynamic body design
"Membrane" rear wall
Rear wall suspended with "double-joint hinge" and split 1/2 to 1/2 with two-leaf doors, equipped with swing arms at the top, and one grain chute per door.
Rear wall with rubber seal
Note! Heat resistant up to max. 170°C!
Continuously 6 mm thick floor
Standing platform with access ladder
Prepared for tarpaulin cover
Hfjdpfjww Icbsx Adksn
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2006
Senda fyrirspurn
Sími & Fax
+49 36482... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp