Opinn hálf-vagn
Fliegl SDS 350 Mega

EXW Föst verð aukaskattur bætist við
10.500 EUR
Ástand
Notað (fullkomlega virkur)
Staðsetning
Triptis Þýskaland
Opinn hálf-vagn Fliegl SDS 350 Mega
Opinn hálf-vagn Fliegl SDS 350 Mega
Opinn hálf-vagn Fliegl SDS 350 Mega
Opinn hálf-vagn Fliegl SDS 350 Mega
Opinn hálf-vagn Fliegl SDS 350 Mega
Opinn hálf-vagn Fliegl SDS 350 Mega
more Images
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega
Fliegl SDS 350 Mega

Grunnupplýsingar

Heiti vélar:
Opinn hálf-vagn
Framleiðandi:
Fliegl
Gerð:
SDS 350 Mega
Vélar númer:
WFDFLT23002024348
Ástand:
notaður
Virkni:
fullkomlega virkur

Verð og staðsetning

EXW Föst verð aukaskattur bætist við
10.500 EUR
Staðsetning:
Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland Þýskaland
Hringdu

Tæknilegar upplýsingar

Mál og þyngd

Heildarþyngd:
39.000 kg
Tómass:
5.865 kg
Hámarks burðargeta:
33.135 kg
Heildarlengd:
13.850 mm
Heildarbreidd:
2.550 mm
Heildarhæð:
1.820 mm

Öxlar og hjól

Öxlastilling:
3 ása
Fjöðrun:
loft
Dekkjastærð:
435/50 R19,5"
Dekkja ástand:
49 prósenta

Skjöl og vottun

Næsta skoðun (TÜV):
04/2027

Frekari upplýsingar

Fyrsta skráning:
12/2018

Tilboðsupplýsingar

Auglýsingarauðkenni:
A23358848
Tilvísunarnúmer:
49397
Uppfærsla:
síðast þann 19.11.2026

Lýsing

# Chassis / Frame
- Welded fine-grain steel construction, fifth wheel plate with replaceable 2" kingpin.
- Full-width rear ramp attachment rail for aluminium ramps. Suitable for loading construction machinery up to 8,000 kg gross weight and 2,500 mm width. Loading ramps must only be used with rear stabilisers deployed!
- Slightly angled outer frame with Load-Lock profile for lashing strap attachment. With side boards fitted, the side boards must be opened to attach straps.
- 24-tonne, 2-speed landing gear, single-side operation, straight lower section, without thrust compensation.
- Folding rear stabilisers, wheel chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection.
- Quarter-shell mudguards in front of the 1st axle and behind each axle, anti-spray flaps behind each axle.
- Spare wheel carrier for 1 spare wheel incl. mounting kit; spare wheel matching the standard tyres, steel rim.
# Axles and Suspension
- SAF disc brake axles, laser-aligned axles and chassis to reduce tyre wear and fuel consumption.
- Air suspension.
- 1st axle automatic lift axle incl. forced lowering and traction assistance, activated by braking 3 times. Traction assistance operates with up to 30% axle load exceedance and max. 25 km/h.
- Lift axle operated below the recommended ride height; no warranty for tyre damage.
# Braking System
- 2-line compressed air braking system, spring-loaded parking brake.
- 2 front fail-safe coupling heads, without connecting lines.
- EBS electronic braking system with front EBS socket, without connecting cable.
- Towing vehicle must ensure ABS functionality!
- Raise/lower valve.
- Ride height with lift axle; raising the lift axle increases loading/overall height by 50 mm (Mega Flex only at low ride or coupling height).
- Vehicle stability system.
# Wheels and Tyres
- 435/50 R19.5 tyres, make selected by manufacturer.
- Steel rims, factory silver.
# Electrical System
- 24 V, multi-chamber lights, yellow LED side lighting.
- 2 white front position lights.
- 2 white/red rear outline marker lights.
- 1 x 15-pin socket at front, without connecting cable.
# Floor
- Approx. 30 mm plywood panels with Omega inserts at cross joints, supported by 8 longitudinal beams for high point loads; forklift axle load up to max. 7,900 kg.
- Premium floor sealing, sealed around the entire perimeter.
- Note: floor deformation due to weather conditions possible!
# Front Bulkhead / Front Corner Posts
- 25 mm aluminium hollow profile, 700 mm high; steel corner posts in volumetric design.
- Crash-Blocker, internal steel impact protection approx. 140 mm high at the bottom.
# Operation / Approval
- Special permit required for gross combination weight exceeding 40 t.
- Exemption required for 9,000 kg axle load. Observe country-specific approval regulations.
- CZ registration, EC type approval according to 2007/46, 24/7 service hotline.
- Prepared for single-line number plate holder, warning board according to ECE 70.
- Reflective contour markings according to ECE R048, white on sides and red at rear.
# Finish
Knodpfxs Ak Npae Ac Eod
- Frame hot-dip galvanised incl. passivation, landing legs black coated, front corner posts hot-dip galvanised, aluminium front bulkhead.

Bjóðandi

Skráð frá: 2006

198 Auglýsingar á netinu

Hringdu

Senda fyrirspurn

Landus 
Þýskaland
Austurríki
Sviss
Bandaríki Norður-Ameríku
Bretland
Frakkland
Belgía
Spánn
Mexíkó
Ítalía
Holland
Pólland
Rússneska sambandsríkið
Hvítrússland (Belarus lýðveldi)
Úkraína
Eistland
Tyrkland
Nýja-Sjáland
Írland
Tékkneska lýðveldið
Danmörk
Finnland
Svíþjóð
Noregur
Lúxemborg
Grikkland
Litháen
Lettland
Ísland
Portúgal
Brasilía
Venesúela
Argentína
Ungverjaland
Slóvakía
Rúmenía
Moldóva
Slóvenía
Serbía
Svartfjallaland
Albanía
Króatía
Búlgaría
Norður-Makedónía
Bosnía og Hersegóvína
Ísrael
Egyptaland
Marokkó
Indland
Indónesía
Suður-Kórea
Japan
Taíland
Malasía
Víetnam
Kína, Alþýðulýðveldið
Taívan
Íran
Bangladesh
Athugasemd: Fyrirspurn þín verður send áfram til allra seljenda í vélaflokknum. Þannig getur þú fengið fjölda tilboða.
Fyrirspurnina tókst ekki að senda. Vinsamlegast reyndu aftur síðar.

Sími & Fax

+49 36482... auglýsingar