Festivagn með fleti og presennuFLIEGL
SDS 390 Gardine Standard Ultralight Coil
Festivagn með fleti og presennu
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW föst verð aukaskattur bætist við
25.990 EUR
framleiðsluár
2021
Ástand
Notað
Staðsetning
Triptis 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Festivagn með fleti og presennu
- framleiðandi:
- FLIEGL
- Vélar númer:
- WFDFLT33902029406
- framleiðsluár:
- 2021
- Ástand:
- næstum eins og nýtt (notað)
- virkni:
- fullkomlega virkur
Verð og staðsetning
EXW föst verð aukaskattur bætist við
25.990 EUR
- Staðsetning:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE
Hringdu
Tæknilegar upplýsingar
- Heildarþyngd:
- 35.000 kg
- Tómass:
- 5.800 kg
- Hámarks burðargeta:
- 29.200 kg
- Öxlastilling:
- 3 ása
- Lestis rýmis fyrir farm:
- 13.650 mm
- Hleðslurýmisbreidd:
- 2.480 mm
- Hlaðhæð:
- 2.790 mm
- Fyrsta skráning:
- 12/2021
- Fjöðrun:
- loftlyfta
- Litur:
- silfur
- Dekkjastærð:
- 385/65 R22.5"
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A19083991
- Tilvísunarnúmer:
- 59340
- uppfærsla:
- síðast þann 06.05.2025
Lýsing
The images are archived; the vehicle may still be in use!
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
Hedpfjwhp A Dsx Adkefn
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
Hedpfjwhp A Dsx Adkefn
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2006
Senda fyrirspurn
Sími & Fax
+49 36482... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp