Kantarvél

Format4 tempora 60.12

with approximately 4000 m of operating time. Comes with a new machine warranty. The machine is sold without the illustrated return system.

Min. workpiece width (mm): The minimum workpiece width varies depending on workpiece length, height, and surface quality: 70
Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm
"e-motion" control system with an 18" touch-screen color display with integrated maintenance software and optional network connectivity
Stable machine frame made of steel
Extendable workpiece support makes it easier to work with large workpieces
Motor-controlled positioning pressure beam with 2 offset arranged roller tracks for even pressure distribution on the workpiece
Chain feed with a feed rate of 12 m/min & rubberized support pads for optimal grip on the workpiece
Ball-bearing roller support plate with a diameter of 770 mm
Infeed guide rail with sliding rollers for sensitive materials
Edge milling unit with tool-controlled diamond milling cutters and 2 motors, each with 1.5 kW at 12000 rpm. Chip removal is motor-controlled and adjustable from 0–3 mm, incl. 2 diamond milling cutters Ø 80 mm H 49 mm Z2+2
Edge detection by means of an infrared sensor
Shear cutting unit for pre-cutting thick PVC/ABS edge materials
Teflon-coated gluing unit with a capacity of 1.5 kg, application by means of a finely adjustable gluing roller & quick-change system and heating cartridge monitoring (~ 250 m per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edges or laminate edges
Fedszcymhjpfx Am Tjph
Pneumatically tool-controlled gluing unit
Motor-controlled positioning pressing unit with 1 large driven pressure roller and 2 conical counter-pressure rollers, pneumatically pre-tensioned
Cutting saw unit with 2 independent motors, each with 0.50 kW at 12000 rpm, pneumatically swiveling 0–15°
Multi-function milling unit for radius, flush and bevel milling of thin edges with 2 independent motors, each with 0.75 kW at 12000 rpm, motor-controlled positioning edge adjustment & pneumatic retraction function from the control panel
Corner processing unit for soft-forming and post-forming workpieces for processing the end edges with edge thicknesses of 0.4–3.0 mm & workpiece heights of 10–60 mm
2-axis motor-controlled positioning radius drawing blade unit incl. pneumatic retraction function
Polishing unit with 2 motors

Special equipment
020 Surface drawing blade, pneumatically tool-controlled
032 Spray device for cleaning agents before the polishing unit
042 Spray device for release agents on the machine infeed side (PUR adhesive)
046 Extended infeed guide rail (+400 mm)
047 Edge milling cutter with replaceable cutting inserts 64 mm height instead of 49 mm, 2 motors with 2.2 kW instead of 1.5 kW each
051 Multi-function milling unit with vertical multiple feeler rollers for processing workpieces with pot-hole drills
053 Spray application of lubricant
Pneumatic-mechanical infeed stop to prevent premature feeding of the machine
059 Automatic lubrication for the chain conveyor
067 Reversing function for the glue tank. Ideally suited for applying solid wood edges or laminate edges
050A Additional quick-change glue tank, counter-rotating
090 "classic" multi-function & radius drawing blade unit e-motion with radius 1+2 mm
071 Motorized adjustment and positioning for corner rounding milling cutter
085 Preparation for u-motion professional
086 Tool preparation R=1.

Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.