KantsnúningavélGriggio
GTM 4/3
Kantsnúningavél
Griggio
GTM 4/3
EXW VB aukaskattur bætist við
10.000 EUR
Framleiðsluár
2017
Ástand
Notað
Staðsetning
Cisnădie 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Kantsnúningavél
- Framleiðandi:
- Griggio
- Gerð:
- GTM 4/3
- Vélar númer:
- 17E000332104800
- Framleiðsluár:
- 2017
- Ástand:
- mjög gott (notað)
- Virkni:
- fullkomlega virkur
- Vinnustundir:
- 300 h
Verð og staðsetning
EXW VB aukaskattur bætist við
10.000 EUR
- Staðsetning:
- Cisnădie, Rúmenía

Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A19865915
- Uppfærsla:
- síðast þann 29.08.2025
Lýsing
1. AUTOMATIC EDGEBANDING MACHINE Model GTM 4/3 – GRIGGIO
The automatic edgebanding machine model GTM 4/3, manufactured by the Italian company GRIGGIO, is a new model launched in 2017, replacing the previous GB 4/3 model. It features a modern concept designed for straight panel edgebanding with PVC and ABS materials. The machine is equipped with the following working units:
a) Gluing unit for hot-melt adhesive, featuring rapid heating and a fully Teflon-coated tank for easy cleaning.
b) Pressure unit for bonding the edging to the panel – equipped with three rollers: the first is a large-diameter driven roller, while the remaining two are idler rollers with opposing tapers.
c) End trimming unit with high-frequency motors designed to trim the overhanging edging flush with the panel at both the front and rear ends at a 90º angle
• Installed power: 0.38 kW
• Blade speed: 12,000 rpm
d) Top & bottom trimming unit with two independent high-frequency motors for removal of excess edging from the top and bottom of the panel
• Motor power: 0.55 kW
e) Scraper unit for optimal finishing of 2 mm PVC or ABS edge banding applied to the panel edge
• Supplied with a pair of knives for use with 2 mm ABS edging
f) Buffing unit
• Two independent motors for cleaning/polishing the edge banding
• Installed power: 0.19 kW
• Equipped with 100 mm diameter brushes
Maximum panel thickness: 45 mm
Minimum panel width: 90 mm
Minimum panel length: 200 mm
Feed speed: 9.5 m/min
Edgebanding overhang (top + bottom): 4 mm (2+2)
Pneumatic system pressure: 6 bar
Frequency inverter: 200 Hz for motors, enabling 12,000 rpm rotational speed
General features:
• The machine frame is constructed from a single-piece, high-rigidity steel sheet.
• Panel feed system is of the caterpillar type, with skids covered with high-adhesion rubber.
• The skids move on dual steel guides – one round and one flat, both hardened and ground, ensuring straight movement and resistance to lateral forces from the working groups.
• Upper pressure unit made of aluminum, featuring rubber pressure wheels mounted on bearings, ensures improved linear piece movement.
Included spare parts kit (in machine price):
- 2 upper rubber pressure rollers
- 1 rubber roller for end trimming unit
- 2 cotton buffing discs
- 5 rubber pads for feed conveyor track
- 4 adhesive pot heating elements
- 1 temperature probe
EXW price: €10,000 (excluded VAT)
Manufactured in EU
Ffodpow Tkl Nsfx Abbew
Excellent condition
No pre-milling unit
Operating hours: 300 h
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
The automatic edgebanding machine model GTM 4/3, manufactured by the Italian company GRIGGIO, is a new model launched in 2017, replacing the previous GB 4/3 model. It features a modern concept designed for straight panel edgebanding with PVC and ABS materials. The machine is equipped with the following working units:
a) Gluing unit for hot-melt adhesive, featuring rapid heating and a fully Teflon-coated tank for easy cleaning.
b) Pressure unit for bonding the edging to the panel – equipped with three rollers: the first is a large-diameter driven roller, while the remaining two are idler rollers with opposing tapers.
c) End trimming unit with high-frequency motors designed to trim the overhanging edging flush with the panel at both the front and rear ends at a 90º angle
• Installed power: 0.38 kW
• Blade speed: 12,000 rpm
d) Top & bottom trimming unit with two independent high-frequency motors for removal of excess edging from the top and bottom of the panel
• Motor power: 0.55 kW
e) Scraper unit for optimal finishing of 2 mm PVC or ABS edge banding applied to the panel edge
• Supplied with a pair of knives for use with 2 mm ABS edging
f) Buffing unit
• Two independent motors for cleaning/polishing the edge banding
• Installed power: 0.19 kW
• Equipped with 100 mm diameter brushes
Maximum panel thickness: 45 mm
Minimum panel width: 90 mm
Minimum panel length: 200 mm
Feed speed: 9.5 m/min
Edgebanding overhang (top + bottom): 4 mm (2+2)
Pneumatic system pressure: 6 bar
Frequency inverter: 200 Hz for motors, enabling 12,000 rpm rotational speed
General features:
• The machine frame is constructed from a single-piece, high-rigidity steel sheet.
• Panel feed system is of the caterpillar type, with skids covered with high-adhesion rubber.
• The skids move on dual steel guides – one round and one flat, both hardened and ground, ensuring straight movement and resistance to lateral forces from the working groups.
• Upper pressure unit made of aluminum, featuring rubber pressure wheels mounted on bearings, ensures improved linear piece movement.
Included spare parts kit (in machine price):
- 2 upper rubber pressure rollers
- 1 rubber roller for end trimming unit
- 2 cotton buffing discs
- 5 rubber pads for feed conveyor track
- 4 adhesive pot heating elements
- 1 temperature probe
EXW price: €10,000 (excluded VAT)
Manufactured in EU
Ffodpow Tkl Nsfx Abbew
Excellent condition
No pre-milling unit
Operating hours: 300 h
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Skjöl
Senda fyrirspurn
Þessar auglýsingar gætu einnig vakið áhuga þinn.
Lítil auglýsing
Bitburg
2.234 km
Snið hringsög með stórum útdráttarhettu
AltendorfWA 6
AltendorfWA 6
Lítil auglýsing
Szentendre
2.961 km
Geymslusilo úr málmi
Holtrop & Jansma
Holtrop & Jansma
Lítil auglýsing
Porażyn
2.436 km
Hagræðing þverskurðarkerfi
Grecon DimterOpticut S75-4
Grecon DimterOpticut S75-4
Lítil auglýsing
Þýskaland
2.273 km
Edge banding vél
Holz-HerArcus 1334
Holz-HerArcus 1334
Lítil auglýsing
Neumarkt in der Oberpfalz
2.493 km
Lághita ketill
Viessmann Vitoplex 200 700kwViessmann Vitoplex 200 700kw
Viessmann Vitoplex 200 700kwViessmann Vitoplex 200 700kw
Lítil auglýsing
Cēsis
2.467 km
Viþurspænslaþurrkari
SPE Renergi
SPE Renergi
Lítil auglýsing
Ítalía
3.247 km
Einhliða brúnbandavél
BIESSEAKRON 1440 AIRTEC
BIESSEAKRON 1440 AIRTEC
Lítil auglýsing
Spatenhof
2.868 km
Kantarvél
HOLZ-HERStreamer 1057 FÜ + PU
HOLZ-HERStreamer 1057 FÜ + PU
Lítil auglýsing
Velekincë
3.553 km
Blásmótunarvél
Krupp CorpoplastBlomax 4
Krupp CorpoplastBlomax 4
Lítil auglýsing
Kežmarok
2.891 km
Björgunarkapa með hagræðingu frá vinstri til hægri
WEINIG DimterOpticut 200 Elite
WEINIG DimterOpticut 200 Elite
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp








































































































