HAAS VF-3YT/50
HAAS VF-3YT/50

Name: HAAS VF-3YT/50
Brand: HAAS
Availability: InStock

Framleiðsluár

2019

Ástand

Notað

Staðsetning

Króatía

Upplýsingar um vélina

Heiti vélar:: HAAS VF-3YT/50

Framleiðandi:: HAAS

Gerð:: VF-3YT/50

Framleiðsluár:: 2019

Ástand:: tilbúinn til notkunar (notaður)

Verð og staðsetning

Staðsetning:: , Króatía

Hringdu

Tæknilegar upplýsingar

X-áss færi:: 1.016 mm

Y-áss færsla:: 660 mm

Förfaravegalengd Z-áss:: 635 mm

Stjórnbúnaðarframleiðandi:: HAAS

Borðhleðsla:: 1.814 kg

Heildarþyngd:: 7.485 kg

Spindilhraði (hámark):: 10.000 snúningur/mín.

Spindilsmótorsafl:: 44.700 W

Fjöldi rifa í verkfærageymslu:: 30

Fjöldi ása:: 3

Tilboðsupplýsingar

Auglýsingarauðkenni:: A22613712

Tilvísunarnúmer:: HR-MIL-HAA-2019-00004

Uppfærsla:: síðast þann 25.08.2026

Lýsing

This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details.

• Condition: Used, fully operational
• Operating/cycle hours: 6,744 h
• Spindle/cutting hours: 4,454 hTravels
• Spindle nose to table: 201–836 mm
• Rapid traverse: 18 m/min
• Maximum cutting feed: 12.7 m/minSpindle and tool changer
• Maximum torque: 460 Nm
• Drive system: Vector drive with 2-speed gearbox
• Tool changer capacity: 30 toolsTable
• Table size: 1,372 × 610 mm
• T-slots: 7
• T-slot width: 15.9–16 mmShipping
• Note: Dimensions listed as 1,370 × 660 × 630 mm are not overall machine dimensions
• Export shipping dimensions (approx.): 3,970 × 2,600 × 3,230 mm
• Approx. shipping weight: 7,485 kg

Additional equipment

• Chip conveyor with four additional augers
• Haas Chip Lift
• Through-Spindle Coolant (TSC), 300 psi / 21 bar
• Programmable coolant nozzle
• Coolant chiller
• ACF 25-micron auxiliary coolant filter
• Coolant mist condenser
• Minimum Quantity Lubrication (MQL)
• Automatic air gun
• Through-Tool Air Blast (TAB)
• PulseJet system
• Renishaw Wireless Intuitive Probing System (WIPS) with probe riser block
• Fourth-axis drive and wiring
• High-Speed Machining (HSM)
• DWO/TCPC (Dynamic Work Offsets/Tool Center Point Control)
• RTAP-3 synchronized tapping
• Wi‑Fi network connection and Wi‑Fi camera
• Automatic door
• High-intensity lighting
• Approximately 15 tool holders
• Complete documentation

Technical Specification
Taper Size ISO 50
Ndodpfx Aozwd Aushyoa

Bjóðandi

Skráð frá: 2017

1.361 Auglýsingar á netinu

Hringdu

Senda fyrirspurn

Sími & Fax

+49 631 7... auglýsingar

Þessar auglýsingar gætu einnig vakið áhuga þinn.

Lítil auglýsing

Oroslavje

2.979 km

Lóðréttur vinnslumiðstöð
HaasVF-3YT/50

73.000 EUR

EXW VB aukaskattur bætist við

Hringdu

Ástand: notaður, Byggingarár: 2019, vinnustundir: 6.744 h, Virkni: fullkomlega virkur, vélar-/ökutækjanúmer: 1163744, X-áss færi: 1.016 mm, Y-áss færsla: 660 mm, förfaravegalengd Z-áss: 635 mm, hraðviðfærsla á X-ás: 18.000 m/mín., hraðflutningur Y-ása: 18.000 m/mín., hraðhröðun Z-áss: 18.000 m/mín., fóðurlengd X-ás: 1.016 mm, færslulengd Y-áss: 660 mm, færslulengd Z-áss: 630 mm, X-áss fóðrunarhraði: 12.700 m/mín., Y-áss inntaks hraði: 12.700 m/mín., Z-áss fóðrunarhraði: 12.700 m/mín., nominalt (skynjanlegt) afl: 45 kVA, tog: 460 Nm, stjórnbúnaðarframleiðandi: Haas, stýrislíkarlíkan: Haas, vinnustykkis lengd (max.): 1.370 mm, vinnslubreidd (hámark): 610 mm, vinnsluhlutahæð (hámark): 630 mm, hlutþyngd (mesta.): 1.814 kg, heildarhæð: 630 mm, heildarlengd: 1.370 mm, heildarbreidd: 660 mm, borðbreidd: 610 mm, borðhæð: 630 mm, borðlengd: 1.372 mm, borðhleðsla: 1.814 kg, spindilhraði (hámark): 10.000 snúningur/mín., spindilinn verklagsstundir: 4.454 h, spindilsmótorsafl: 44 W, fjöldi rifa í verkfærageymslu: 30, Búnaður: sagflutningsband,

Sjá nánar

Uppboð