SprautumótunarvélHAITIAN
Mars II 7000/2950
Sprautumótunarvél
HAITIAN
Mars II 7000/2950
framleiðsluár
2013
Ástand
Notað
Staðsetning
Wrocław 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Sprautumótunarvél
- framleiðandi:
- HAITIAN
- Gerð:
- Mars II 7000/2950
- framleiðsluár:
- 2013
- Ástand:
- mjög gott (notað)
Verð og staðsetning
- Staðsetning:
- Kwiatkowskiego 5a, 52-407 Wrocław, PL
Hringdu
Vélasala

Fannstu nýja vél? Nú breytir þú því gamla í peninga.
Náðu bestu verði í gegnum Machineseeker.
Meira um sölu á vélum
Meira um sölu á vélum
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A19921435
- uppfærsla:
- síðast þann 04.09.2025
Lýsing
Haitian Mars II 7000/2950 Injection Moulding Machine
Year of manufacture: 2013
Dcodsw U Tu Njpfx Agwen
Injection Unit
The machine is equipped with an 80 mm diameter mixing screw. Maximum shot volume is 1860 cm³, and the maximum shot weight for PS is 1692.6 g. The specific injection pressure reaches 1580 bar. The maximum screw rotation speed is 200 rpm, while the plasticising capacity (for PS) is 76.8 g/s. The cylinder heating power is 38.35 kW.
Clamping Unit
Clamping force is 7000 kN. The distance between tie bars is 940 × 960 mm. Mould installation height ranges from 400 to 940 mm. The opening stroke is 970 mm. Centring (A.S.–D.S.) is 200/200 mm. The ejector has a total stroke of 260 mm with an effective travel of 200 mm.
Additional Equipment
The machine is equipped with four core-pull circuits: two on the moving platen and two on the fixed platen.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Year of manufacture: 2013
Dcodsw U Tu Njpfx Agwen
Injection Unit
The machine is equipped with an 80 mm diameter mixing screw. Maximum shot volume is 1860 cm³, and the maximum shot weight for PS is 1692.6 g. The specific injection pressure reaches 1580 bar. The maximum screw rotation speed is 200 rpm, while the plasticising capacity (for PS) is 76.8 g/s. The cylinder heating power is 38.35 kW.
Clamping Unit
Clamping force is 7000 kN. The distance between tie bars is 940 × 960 mm. Mould installation height ranges from 400 to 940 mm. The opening stroke is 970 mm. Centring (A.S.–D.S.) is 200/200 mm. The ejector has a total stroke of 260 mm with an effective travel of 200 mm.
Additional Equipment
The machine is equipped with four core-pull circuits: two on the moving platen and two on the fixed platen.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2019
Senda fyrirspurn
Sími & Fax
+48 71 70... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
lítil auglýsing

2.568 km
Sprautumótunarvél
HaitianMars II 7000/2950
HaitianMars II 7000/2950
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp