Lárétt 4-ása vinnslustöðHeller
H 5000
Lárétt 4-ása vinnslustöð
Heller
H 5000
Framleiðsluár
2025
Ástand
Notað
(fullkomlega virkur)
Staðsetning
Besigheim 

Grunnupplýsingar
- Heiti vélar:
- Lárétt 4-ása vinnslustöð
- Framleiðandi:
- Heller
- Gerð:
- H 5000
- Framleiðsluár:
- 2025
- Ástand:
- næstum eins og nýtt (notað)
- Virkni:
- fullkomlega virkur
Verð og staðsetning
- Staðsetning:
- Besigheim, Deutschland

Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A23350937
- Uppfærsla:
- síðast þann 18.11.2026
Lýsing
If you are interested, please submit a purchase offer.
4-axis HELLER machining center H5000
Location: Besigheim
Facility closure
The machine has already been disassembled by the manufacturer, Heller.
Collection will take place this year.
Machining center H 5000
Machine
Horizontal 4-axis machining center H 5000
Siemens control SINUMERIK ONE
Machine bed in T-design
Work area: 800 × 800 × 800 mm
Pallet size: 630 × 630 mm
Two pallets with DIN hole pattern
Pallet changer
Manually rotatable workpiece clamping device with 4 × 90°
Operating voltage: 400 V, 50 Hz
HELLER standard paint finish:
Signal white, RAL 9003
Anthracite gray, RAL 7016
Ultramarine blue, RAL 5002
Main spindle
Dynamic Cutting DC 100
Tool holder: HSK-A 100
Speed range: 5 to 12,000 rpm
Drive power: 45 kW
Max. torque: 400 Nm
Manual tool change directly into the spindle
Tool extraction to reduce coolant carryover and mist
Tool management
Chain magazine with 50 tool positions
Increased tool weight and moment of inertia according to technical specifications
Tool measurement with BLUM LC50 DIGILOG
BLUM radio receiver for measuring probe
Measuring probe TC62 including BTH25-3
Siemens measuring cycles
Comfort operating terminal at the tool clamping station
Workpiece management
Workpiece clamping device with manually rotatable pallet
Mechanical workpiece clamping
Two pallets in the base machine
Pallet change accuracy according to technical specifications
Coolant and disposal systems
Scraper conveyor for wet machining
Electrical run control of the chip conveyor
Paper band filter TMF600
Coolant supply with 70 bar
Frequency-controlled high-pressure pump
Work area flushing
Coolant tank with a capacity of 1,050 l
Interface for a customer-side extraction system
Separate connection for an oil skimmer
MMS system from Dropsa
Preparation for an oil mist separator
Control and software
Siemens SINUMERIK ONE with NCU 1750 and PLC S7-1500F
24-inch multi-touch screen
HELLER Operation Interface
PC keyboard on the main operating unit
Extended NC user memory
Additional program data memory on SD card
3D data for working space models
ToolScope for tool process monitoring
Hardware for spindle condition monitoring
Preparation for integration into a company network
Ethernet interface
Support for machine communication via OPC UA
Preparation for additional data acquisition hardware
Reserved installation space and 24 V DC supply in the control cabinet
Camera and measuring technology
Internal camera from Uyar
Visualization of the camera images on the operating panel
BLUM workpiece measuring probe
BLUM laser measuring bridge LC50 for tool breakage detection
Remote maintenance
HELLER4Industry Remote Diagnostics
Remote access for fault diagnosis
Automated data services for condition and fault analysis
Testing and training as part of commissioning
Documentation
The delivery includes, among other things:
Ibsdpfx Anj Akxy Hoxjd
Operating and programming instructions
Maintenance and repair documents
Spare parts and wear parts lists
Electrical, hydraulic and pneumatic circuit diagrams
3D data for working space models
Safety data sheets for the media used
Basic settings of the machine parameters
Declaration of conformity and CE marking
Foundation construction and placement of the machine up to the installation location
Installation area: approx. 7.3 × 3.38 m
Machine height: approx. 3.90 m
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
4-axis HELLER machining center H5000
Location: Besigheim
Facility closure
The machine has already been disassembled by the manufacturer, Heller.
Collection will take place this year.
Machining center H 5000
Machine
Horizontal 4-axis machining center H 5000
Siemens control SINUMERIK ONE
Machine bed in T-design
Work area: 800 × 800 × 800 mm
Pallet size: 630 × 630 mm
Two pallets with DIN hole pattern
Pallet changer
Manually rotatable workpiece clamping device with 4 × 90°
Operating voltage: 400 V, 50 Hz
HELLER standard paint finish:
Signal white, RAL 9003
Anthracite gray, RAL 7016
Ultramarine blue, RAL 5002
Main spindle
Dynamic Cutting DC 100
Tool holder: HSK-A 100
Speed range: 5 to 12,000 rpm
Drive power: 45 kW
Max. torque: 400 Nm
Manual tool change directly into the spindle
Tool extraction to reduce coolant carryover and mist
Tool management
Chain magazine with 50 tool positions
Increased tool weight and moment of inertia according to technical specifications
Tool measurement with BLUM LC50 DIGILOG
BLUM radio receiver for measuring probe
Measuring probe TC62 including BTH25-3
Siemens measuring cycles
Comfort operating terminal at the tool clamping station
Workpiece management
Workpiece clamping device with manually rotatable pallet
Mechanical workpiece clamping
Two pallets in the base machine
Pallet change accuracy according to technical specifications
Coolant and disposal systems
Scraper conveyor for wet machining
Electrical run control of the chip conveyor
Paper band filter TMF600
Coolant supply with 70 bar
Frequency-controlled high-pressure pump
Work area flushing
Coolant tank with a capacity of 1,050 l
Interface for a customer-side extraction system
Separate connection for an oil skimmer
MMS system from Dropsa
Preparation for an oil mist separator
Control and software
Siemens SINUMERIK ONE with NCU 1750 and PLC S7-1500F
24-inch multi-touch screen
HELLER Operation Interface
PC keyboard on the main operating unit
Extended NC user memory
Additional program data memory on SD card
3D data for working space models
ToolScope for tool process monitoring
Hardware for spindle condition monitoring
Preparation for integration into a company network
Ethernet interface
Support for machine communication via OPC UA
Preparation for additional data acquisition hardware
Reserved installation space and 24 V DC supply in the control cabinet
Camera and measuring technology
Internal camera from Uyar
Visualization of the camera images on the operating panel
BLUM workpiece measuring probe
BLUM laser measuring bridge LC50 for tool breakage detection
Remote maintenance
HELLER4Industry Remote Diagnostics
Remote access for fault diagnosis
Automated data services for condition and fault analysis
Testing and training as part of commissioning
Documentation
The delivery includes, among other things:
Ibsdpfx Anj Akxy Hoxjd
Operating and programming instructions
Maintenance and repair documents
Spare parts and wear parts lists
Electrical, hydraulic and pneumatic circuit diagrams
3D data for working space models
Safety data sheets for the media used
Basic settings of the machine parameters
Declaration of conformity and CE marking
Foundation construction and placement of the machine up to the installation location
Installation area: approx. 7.3 × 3.38 m
Machine height: approx. 3.90 m
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Senda fyrirspurn
Sími & Fax
+49 641 9... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Austurríki
2.331 km
HELLER H5000
HELLERH5000
HELLERH5000
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Austurríki
2.331 km
HELLER H5000
HELLERH5000
HELLERH5000
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp




































