Reynslu - Vökvapressa 500 t

Hidroliksan HCFP

HIDROLIKSAN HCFP – 500-ton Hydraulic Tryout/Testing Press for Toolmaking and Forming Technology

The machine is a tryout/testing press for tools in the field of forming, deep drawing and toolmaking.
It is fully functional, ready for operation and can be inspected and tested while powered on.

The press frame consists of a 4-column construction, a generous working area and a hydraulic system with REXROTH pump technology.
The control system is a SIEMENS S7-1200 with a touch panel and extensive parameterization options.

Scope of delivery & Accessories
Tool sliding and lifting ball system GÜTHLE
Hydraulic foot pedal (GÜTHLE)
Roller bolster/carrier console 10 t (GÜTHLE)
4-channel tool clamping system (length 1500 mm, 2 t per channel)
Complete REXROTH hydraulic unit
Air cooler

Condition of the machine
Fully functional
Hydraulic system is leak-free and runs smoothly
Control system & electrical components in good condition
Mechanically sound, no visible damage
The machine is in assembled condition and can be demonstrated while powered on.

Press force:
Nominal force: 500 t
Max. press force at 250 bar: approx. 510 t
Dimensions & Weight:
Nsdpfx Aex D Tv Dshyoda
Overall dimensions approx.: 3500 × 2400 × 6000 mm
Total weight: approx. 45,000 kg

Working area:
Table area: 2000 × 1500 mm
Column spacing (internal): 2000 × 900 mm
Installation height: 1000 mm
Stroke: 800 mm (linearly adjustable via linear measuring system)
T-slots available (mounting positions to be defined by customer)

Hydraulic system:
Main cylinder
Number: 2
Piston Ø: 340 mm
Rod Ø: 280 mm
Auxiliary/planing cylinder
Number: 2
Piston Ø: 120 mm
Rod Ø: 70 mm
Draw cushion
Force: 150 t
Cylinder: 2 × Ø 310 × 210 mm
Stroke: 400 mm

Pumps and tank
Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min
Hydraulic tank: 1200 L
Oil system: 1000 L filling capacity
Speeds
Forward stroke: 120 mm/s
Return stroke: 150 mm/s
Working/pressure stroke: 12 mm/s

Control & Safety:
Control system
SIEMENS S7-1200 + ET200S
12" Touch Panel Schneider Electric
Operating modes:
Two-hand automatic mode
Setup mode
Single stroke
Stroke without draw cushion
Deep drawing mode with draw cushion
Measuring & safety components
Linear measuring system Novatechnik (63 Bit) for ram and draw cushion
Light barriers SICK at the front and rear (height: 1050 mm)
Side protective grilles with limit switches
Remote maintenance via Ethernet possible
Mobile control panel

International Note Block (DE/EN)
German
Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk.
The seller does not provide equipment, personnel or loading assistance.
Collection only by prior appointment.
English
Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk.
The seller does not provide personnel, equipment, lifting devices or loading assistance.
Pickup must be scheduled in advance.
Sale is EXW (Incoterms 2020).

Location: Saxony/ Germany

Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.