Vélræn vinnslumiðstöð fyrir portal

HOMAG O BAZ 722/58/K

HOMAG BAZ 722/58/K
Gantry 4-Axis CNC Machine with 2 Shuttle Tables and Gluing Unit
Year of manufacture: 2004

NOTE: The main spindle and the machine’s control computer were replaced approx. 2.5 years ago.

Workpiece length X max. (with gluing unit)
- max. 5660 mm with single loading
- max. 2680 mm with pendulum (shuttle) operation
Workpiece length max. (milling cutter D=25mm)
- max. 5860 mm with single loading
- max. 2870 mm with pendulum operation

Workpiece width Y max.:
- max. 1300 mm – all units
- max. 1400 mm – with gluing unit
- max. 1520 mm – with milling operation D=25 mm

EQUIPMENT / SPECIFICATION
Console Table / Vacuum System
- 2 independently operating shuttle tables in Y-direction (2 Y-axes)
- Both shuttles can be synchronized for machining large workpieces (single mode)
- 6 movable consoles per shuttle (total 12), each with 1 longitudinal stop at the front
- Each console fitted with a lifting rail mounted on the side
- Console length 1340 mm
- 3 retractable lateral stops (2 left, 1 right, mirror position)
- Approx. 20 vacuum blocks 160x140 mm
- 2 vacuum pumps, capacity 100/140 m3/h, 1 per field (left/right)

Milling Spindle / Units / Tool Changer
- Main spindle 7.5 kW (S6 or S1 mode), n max = 18000 rpm, vector-controlled
- HSK F63 tool clamping
- Liquid cooling with temperature monitoring
- NOTE: The main spindle was replaced in 2021.
- C-axis with unit interface
- Auxiliary spindle with permanently mounted gluing unit (with its own X & C axis),
360° edge banding with butt joint gluing
- Double edge roll magazines, automatic edge change
- Fixed vertical drilling head with 12 spindles (individually selectable) /
6 spindles in X, 7 spindles in Y direction
Drive motor 4 kW, 4500 – 6000 rpm
- 18-position tool changer (carousel type)
- Sawing and trimming unit for tool changer
- Boring and milling unit with 4 spindles (2 x X-, 2 x Y-direction)
- Combination flush trim and scraping knife unit
Nkjdpfx Adewpb Nfs Dju

Chip Disposal / Safety / Other
- Chip conveyor integrated in machine body
- Safety fence left and right of the machine, 1 access door with safety interlock
- Extraction port

Control / Software:
• PowerControl PC85 operating system
NOTE: Both machine control computers were replaced in 2020.
• WoodWop 5.0
• WoodScout
• Power supply 400 V, 50/60 Hz
• Cooling unit for control cabinet
• Laser positioning Mr. BEAM

Machine dimensions (occupied space after installation):
L 1150 x W 700 x H 290 cm

Availability: Immediately

Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.