CNC vinnslumiðstöð HOMAG PROFI BAZ20/30/16/V/D (2003)

HOMAG PROFI BAZ20/30/16/V/D

- Workpiece length: 800 - 3000 mm
- Workpiece width: 350 - 1400 mm
- Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling
- Main spindle 12 kW
- Tool changer, 18-position

CNC machining center
Manufacturer: Homag
Type: PROFI BAZ20/30/16/V/D
Year of manufacture: 2003
Technical data
Homatic - CNC control
CNC programming system WOODWOP
Postprocessor
Workpiece dimensions
- Workpiece length: 800 - 3000 mm
- Workpiece width: 350 - 1400 mm
- Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling
- Edge band width: min. 120 mm
- Weight: max. 150 kg

Throughfeed table
- Longitudinal console 1, fixed installation
- Longitudinal console 2, manually adjustable via width adjustment in the Y-direction
- 8 vacuum clamps 125 x 50 x 100 mm
- Working height, bottom edge of workpiece: 950 mm

Motor, width adjustment, longitudinal console, traversing table
- For different workpiece widths via servo drive for throughfeed table
- Per longitudinal console

Chip conveyor
- Chip and waste disposal via integrated chip conveyor under the longitudinal traverse

Stop pins for top layer overhang
- Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang
- Individually selectable, end position monitored, stroke 110 mm
- For manual placement of doors

Vacuum pump 100/140 m3/h
Unit for positioning the vacuum clamps
- Mounted on the unit carrier with pneumatic extension console
- For max. 4 vacuum clamps per longitudinal console

Main spindle 12 kW
- Tool holder HSK F63
- Extraction system for all tools and units
- Three-phase asynchronous motor 12 kW at S1, water-cooled
- Tool weight: max 6 kg incl. holder
- Tool length: max. 200 mm from the motor spindle bottom edge
- Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools
- Frequency converter: 15 kW
- Speed range: 1500 - 18000 rpm, stepless, programmable
- Full rated power from 12000 rpm

Unit interface for the main spindle
- For connecting the machining units
- Pneumatic and swivel drive interface
- C-axis with torque transmission and 3-point support

Tool changer, 18-position
For tools and units with HSK F63
Tool weight: 6 kg
Tool length: max. 200 mm from the motor spindle bottom edge
The following tool and unit configurations are possible
- 18 x max. 130 mm
- 9 x max. 180 mm and 9 x max. 70 mm
- Tool diameter max. 200 mm for sanding tools
- Tool changer can be raised for a moving pick-up station on the left side

Drilling/milling unit, 4 spindles, for tool changer
- For automatic changing in the main spindle
- Collet holder ER25 up to max. 16 mm shank diameter
- Tool protrusion max. 50 mm
- Speed: max. 13500 rpm
- Standard collet 10 mm
- Infinitely swiveling via the C-axis
- Without tool

Lock case milling unit, 2 spindles, D=16/20
- With integrated blow-out nozzle
- Two-sided spindle outlet with counter-rotating direction
- Speed: 12000 rpm
- Infinitely swiveling via the C-axis
- Without tool

1x Weldon chuck: 20 mm
- Reducing sleeve for tool 16 mm
- Total tool length: 180 mm
- Tool protrusion: max. 135 mm

1x ER16 collet with 10 mm
- Total tool length: max. 70 mm
- Tool protrusion: max. 40 mm

Sawing/drilling unit, swiveling, for tool changer
- For miter cuts and angled drilling
- Manually swiveling 0 - 90 degrees
- Mounting flange 30 mm with countersunk head screws
- Tool diameter 52 mm
- Prepared for miter saw: max. 180 mm
- Drill chuck with Weldon chuck: D=10 mm
- Speed: max. 9000 rpm
Guedozux Tpjpfx Apysh
- Infinitely swiveling via the C-axis
-

Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.