Flötublett stansvél 120×160 cmIijima (Japan)
EFC-1600
Flötublett stansvél 120×160 cm
Iijima (Japan)
EFC-1600
CFR föst verð aukaskattur bætist við
85.000 EUR
framleiðsluár
1984
Ástand
Notað
Staðsetning
Son 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Flötublett stansvél 120×160 cm
- framleiðandi:
- Iijima (Japan)
- Gerð:
- EFC-1600
- framleiðsluár:
- 1984
- Ástand:
- mjög gott (notað)
- virkni:
- fullkomlega virkur
Verð og staðsetning
CFR föst verð aukaskattur bætist við
85.000 EUR
- Staðsetning:
- Ekkersrijt 3106, 5692 CC Son en Breugel, NL
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A18732421
- uppfærsla:
- síðast þann 25.06.2025
Lýsing
Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested.
Overall condition is very good.
From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102.
Iijdjv Nzpgopfx Afwoh
Maximum format 1200 x 1600 mm
Corrugated cardboard thickness 2–11 mm
Maximum solid board thickness 3 mm
Normal maximum die-cutting pressure 350 tons
Die knife height 30.00 mm
Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy."
The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Overall condition is very good.
From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102.
Iijdjv Nzpgopfx Afwoh
Maximum format 1200 x 1600 mm
Corrugated cardboard thickness 2–11 mm
Maximum solid board thickness 3 mm
Normal maximum die-cutting pressure 350 tons
Die knife height 30.00 mm
Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy."
The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2014
Senda fyrirspurn
Sími & Fax
+31 499 2... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp