Einhliða brúnlímingarvél IMA Combima Systems (2005)

IMA eins. Kantenanleimmaschine Combima Systems

- Automatic infeed table
- KFA unit
- Return system

Used single-sided edge banding machine
Manufacturer: IMA
Type: Combima Systems / I/R751220/R3
1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials.
- Automatic infeed table
- KFA unit
- Return system

Technical data "Workpiece":
Workpiece length
- min.: 238 mm
- max.: 2350 mm

Workpiece width
- min.: 142 mm
- max.: 800 mm

Workpiece thickness:
- min.: 8 - 40 mm

Technical data "Strip" (only for longitudinal processing):
Roll material:
- Paper edge bands & plastic edge bands: 0.3 - 3.0 mm
- Veneer edge bands: 0.5 - 3.0 mm

Edge height:
- min.: 14 mm
- max.: 45 mm

Technical data "Machine":
Variable workpiece overhang from the chain conveyor
(including edge with edge thickness 0.3-3 mm):
- min.: 40 mm
- max.: 80 mm
- PC control ICOS open
- Feed speed v=5-25 m/min, frequency-controlled drive
- Inclined roller table as infeed section

NC infeed system for front and carcass parts
- for length and width-independent automatic workpiece feed in single-sided edge processing machines.

Only for the production of strip material in the 2nd pass
- An additional stop rail, adjustable via NC axis.

Double milling unit 08.376:
- Controllable
- Motor 1 operating in the same direction and motor 2 operating in the opposite direction
- Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW.
- Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge.
Hsdjzuypljpfx Anrjnr
- Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm.
- Adhesive application for workpiece thickness max. 50 mm
- 2 pre-melting tanks for PU adhesive
- 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm)

Vertical roll holder for 12 rolls:
- max. roll diameter 850 mm
- max. edge height 45 mm
- Trimming unit 08.42, for 2 motors mounted on the upper pressure bar
- Pre-milling and milling unit with height sensor
- with 1 motor 1000 W
- Multi-profile / chamfer unit, with 2 motors 1000 W
- Contour milling unit KFA 30
- Multi-profile drawing blade unit
- Flat drawing blade 08.517
- Copy edging unit 08.604
- Edging unit 08.617-2
- Double milling stand 75.184, 1050 mm high, both stand sides can be used
- Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm
- Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm
- Motor spindle for the use of the Hydro-Format tool system
- Return system, manufacturer Meinert

Note:
The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.