KBA40/11000Jansen Maschinen GmbH
KBA40/11000
KBA40/11000
Jansen Maschinen GmbH
KBA40/11000
Framleiðsluár
2017
Ástand
Notað
(fullkomlega virkur)
Staðsetning
Rastdorf 

Grunnupplýsingar
- Heiti vélar:
- KBA40/11000
- Framleiðandi:
- Jansen Maschinen GmbH
- Gerð:
- KBA40/11000
- Vélar númer:
- 17.018.011
- Framleiðsluár:
- 2017
- Ástand:
- notaður
- Virkni:
- fullkomlega virkur
Verð og staðsetning
- Staðsetning:
- Rastdorf, Þýskaland

Hringdu
Tæknilegar upplýsingar
Spindlar
Spindilhraði (hámark):
3.000 snúningur/mín.
Upplýsingar um afl
Inngangsspenna:
380 V
Inntakstraumsgerð:
þriggja fasa
Skjöl og vottun
Skjöl / handbók
Vinnanlegt efni / vinnanlegar vörur
Hlutþyngd (mesta.):
3.500 kg
Áss upplýsingar
X-áss færi:
11.000 mm
Y-áss færsla:
500 mm
Förfaravegalengd Z-áss:
500 mm
Hraðhröðun Z-áss:
5 m/mín.
Hraðviðfærsla á X-ás:
20 m/mín.
Hraðflutningur Y-ása:
10 m/mín.
Frekari upplýsingar
Borgeta geta:
40 mm
Snúningshraði óendanlega breytilegur
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A23345423
- Uppfærsla:
- síðast þann 17.11.2026
Lýsing
The CNC drilling machine KBA 40 is a development specifically designed for craft businesses and metalworking companies. Time-consuming measuring, marking, and center-punching are no longer necessary.
Isdpfx Ane Akrktjxobd
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Isdpfx Ane Akrktjxobd
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Skjöl
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Síðast á netinu: Í dag
Skráð frá: 2026
2 Auglýsingar á netinu
Senda fyrirspurn
Sími & Fax
+49 5956 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp














