Hringlaga sagJOEMA
300 x 2600 mm
Hringlaga sag
JOEMA
300 x 2600 mm
föst verð aukaskattur bætist við
10.900 EUR
framleiðsluár
2013
Ástand
Notað
Staðsetning
Achern 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Hringlaga sag
- framleiðandi:
- JOEMA
- Gerð:
- 300 x 2600 mm
- framleiðsluár:
- 2013
- Ástand:
- almennt endurnýjaður (notaður)
- virkni:
- fullkomlega virkur
Verð og staðsetning
föst verð aukaskattur bætist við
10.900 EUR
- Staðsetning:
- Am Risisee 4, 77855 Achern-Gamshurst, DE
Hringdu
Tæknilegar upplýsingar
- Afl:
- 18,5 kW (25,15 hP)
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A2144114
- uppfærsla:
- síðast þann 12.09.2025
Lýsing
-300 mm x 2600 mm max. timber cross-section
-circular saw blade D 900 mm
determination of the value
8.000 € new flat motor 18.5 kW / 1450 r/min with flange
4.300 € new positioning gearmotor
1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount
8.500 € new electrical control cabinet
22.500 € without steel construction and without assembly
-the special saw was only used for about 5 hours after the overhaul
>>Made in West Germany 100%
massive steel construction with movable portal and mounted saw unit from above,
circular saw motor 18.5 kW, 1450 rpm with electronic brake
travel drive 2.5 kW with frequency converter, travel speed infinitely variable
saw blade max. D 900 mm, cutting height max. approx. 300 mm
if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and
Hedpfx Adecbq Nwokofn
completely covered.
machine overhauled without additional safety devices
>> The working width can also be increased by conversion
-circular saw blade D 900 mm
determination of the value
8.000 € new flat motor 18.5 kW / 1450 r/min with flange
4.300 € new positioning gearmotor
1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount
8.500 € new electrical control cabinet
22.500 € without steel construction and without assembly
-the special saw was only used for about 5 hours after the overhaul
>>Made in West Germany 100%
massive steel construction with movable portal and mounted saw unit from above,
circular saw motor 18.5 kW, 1450 rpm with electronic brake
travel drive 2.5 kW with frequency converter, travel speed infinitely variable
saw blade max. D 900 mm, cutting height max. approx. 300 mm
if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and
Hedpfx Adecbq Nwokofn
completely covered.
machine overhauled without additional safety devices
>> The working width can also be increased by conversion
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2013
Senda fyrirspurn
Sími & Fax
+49 7841 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp