Vinnuplattform hálfvagn

KÖGEL 3-Achs-Mega Chassis

You can find our complete range of vehicles, including immediately and short-term available units, on our website.

Excerpt from the equipment. Full equipment details available upon request.

Frame:
* Standard ladder-type steel lightweight frame with through crossmembers
* Pre-cambered chassis frame
* Cover plate between side frame and main beams as tire protection for the drive axle wheels of the tractor unit
* Approx. 8 mm thick coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337

Chassis:
* Axle lift mechanism on axle 1
* BPW three-axle ECO Air unit with disc brakes, approx. Ø 370 mm, ET 120
* Air suspension, approx. 260 mm stroke

Vehicle Tyres:
* 6x 445/45 R 19.5, 160J tires

Chassis attachments:
* Mechanical landing gear with compensating foot, approx. 24 t lifting capacity, single-sided operation on the right in direction of travel
* Tool-free folding side underrun protection, right and left in direction of travel
* Spare wheel carrier with winch including 1 wheel fixing kit, installed behind the axle unit
* Mounting for 16 square tube stake pockets approx. 80 x 80 x 1,990 mm, installation on both left and right sides of the longitudinal beam in direction of travel
* Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm, installed at rear left in the direction of travel
* Rear right retractable boarding ladder

Brake / Air Suspension System:
Hfodpfx Afsx Tx Efs Rsb
* EBS 2S/2M system with stability program (includes ABS/ALB function), EBS socket ISO 7638 (without connecting lines)
* Parking brake as spring-actuated brake, external pneumatic connections, as well as external EBS diagnostic connector via ISO 7638 socket
* WABCO EBS system
* Air suspension system including one lift and lower valve, installed on the left behind the axle unit in direction of travel. Driving position adjusts automatically
* Two foolproof coupling heads in front ISO 1728
* Brake and air reservoir tanks made of steel (EN 286-2)

Floor:
* Plywood floor panels, approx. 30 mm thick, multi-glued
* Rear floor sealed
* Pockets for square tube stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 pocket rail strips (18 stake pockets per strip: 4 outside + 10 in the center per strip)

Front wall:
* Approx. 2,000 mm high front wall with high-volume corner stanchions made of steel, profiled steel sheet, bolted/riveted to the frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the bulkhead according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used for tensioning, especially if the vehicle is operated without side boards and tailgate/door!
* Side wall VarioFix steel perforated outer frame without stake carriers
* 24 pairs of lashing rings in the outer frame (to EN 12640), permissible tensile force approx. 5,000 kg per ring

Electrics / Electronics:
* Steel light support, positioned above the underrun protection
* KÖGEL LUXIMA Premium package consisting of: LED license plate lighting, LED marker lights and reflectors front, flashing LED side marker lamps, Superseal and bayonet light connectors
* 2 outline lights with arm, fitted to the multi-chamber tail lights
* 2 multi-chamber tail lights
* Fixed adapter box with 2x 7-pin sockets (1x ISO 1185 / 1x ISO 3731, 24 V-N / 24 V-S) and 15-pin socket ISO 12098
* Compact LED revolving beacon, orange, with mounting tube, arranged on the light support. Switch in the lamp casing

Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.