Snúningur beygja vélKRAMER
AMS 1000/1,5
Snúningur beygja vél
KRAMER
AMS 1000/1,5
framleiðsluár
1981
Ástand
Notað
Staðsetning
Goldenstedt 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Snúningur beygja vél
- framleiðandi:
- KRAMER
- Gerð:
- AMS 1000/1,5
- framleiðsluár:
- 1981
- Ástand:
- notaður
Verð og staðsetning
- Staðsetning:
- Goldenstedt
Hringdu
Vélasala

Hefur þú þegar auglýst notaða vélina þína?
Seldu í gegnum Machineseeker án þóknunar.
Meira um sölu á vélum
Meira um sölu á vélum
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A19971535
- Tilvísunarnúmer:
- 2031-3961
- uppfærsla:
- síðast þann 10.09.2025
Lýsing
sheet width 1020 mm
plate thickness 1,5 mm
daylight opening max. 85 mm
weight of the machine ca. 240 kg
Smallest bending width factor 10 x sheet thickness s
Smallest inner radius factor 1.5-2 x sheet thickness s
Lowering capability of the lower and bending beams 20 mm
Dodpoxbtrtefx Aczoku
On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring.
The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned.
The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!
plate thickness 1,5 mm
daylight opening max. 85 mm
weight of the machine ca. 240 kg
Smallest bending width factor 10 x sheet thickness s
Smallest inner radius factor 1.5-2 x sheet thickness s
Lowering capability of the lower and bending beams 20 mm
Dodpoxbtrtefx Aczoku
On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring.
The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned.
The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Senda fyrirspurn
Sími & Fax
+49 4444 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp