SprautumótunarvélKraussMaffei
KM 1300 – 12000 MX
Sprautumótunarvél
KraussMaffei
KM 1300 – 12000 MX
framleiðsluár
2015
Ástand
Notað
Staðsetning
Wrocław 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Sprautumótunarvél
- framleiðandi:
- KraussMaffei
- Gerð:
- KM 1300 – 12000 MX
- framleiðsluár:
- 2015
- Ástand:
- mjög gott (notað)
Verð og staðsetning
- Staðsetning:
- Kwiatkowskiego 5a, 52-407 Wrocław, PL
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A19549486
- uppfærsla:
- síðast þann 11.07.2025
Lýsing
Krauss Maffei KM 1300 – 12000 MX Injection Molding Machine
Year of manufacture: 2015
General description:
The injection molding machine is equipped with a fully hydraulic clamping system.
Control is implemented via the advanced MC6 system, based on an industrial PC using real-time Ethernet technology.
A 19-inch integrated control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes through ProcessDesigner software.
Plasticizing unit:
Complete unit for thermoplastics
Wear-resistant (abrasion-resistant) version
Screw diameter: 120 mm
Check valve
Open nozzle
Technical data:
Clamping unit:
Clamping force: 13,000 kN
Mold opening force: 910 kN
Platen dimensions (h × v): 2210 × 1910 mm
Tie bar spacing (h × v): 1570 × 1270 mm
Ejector stroke: 350 mm
Ejector force (forward / backward): 250 / 125 kN
Injection unit:
Screw diameter: 120 mm
Injection pressure: 1758 bar
Shot volume: 6786 cm³
Shot weight (for PS): 6175 g
Knodewyxlrspfx Afwjc
Injection rate: 1117 cm³/s
Screw speed (standard/option): 103 / 145 rpm
Plasticizing capacity for PS:
At standard speed: 174 g/s
At higher speed (option): 246 g/s
Electro-hydraulic equipment:
Pump motor power: 132 kW
Heater power: 82 kW
Number of barrel heating zones: 7
Dry cycle time (according to Euromap 6): 765 cycles/h
Hydraulic oil tank capacity: 2440 l
Dimensions and weight:
Net weight (with control cabinet): 70 tons
Dimensions (length × width × height): 13.03 × 3.65 × 2.82 m
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Year of manufacture: 2015
General description:
The injection molding machine is equipped with a fully hydraulic clamping system.
Control is implemented via the advanced MC6 system, based on an industrial PC using real-time Ethernet technology.
A 19-inch integrated control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes through ProcessDesigner software.
Plasticizing unit:
Complete unit for thermoplastics
Wear-resistant (abrasion-resistant) version
Screw diameter: 120 mm
Check valve
Open nozzle
Technical data:
Clamping unit:
Clamping force: 13,000 kN
Mold opening force: 910 kN
Platen dimensions (h × v): 2210 × 1910 mm
Tie bar spacing (h × v): 1570 × 1270 mm
Ejector stroke: 350 mm
Ejector force (forward / backward): 250 / 125 kN
Injection unit:
Screw diameter: 120 mm
Injection pressure: 1758 bar
Shot volume: 6786 cm³
Shot weight (for PS): 6175 g
Knodewyxlrspfx Afwjc
Injection rate: 1117 cm³/s
Screw speed (standard/option): 103 / 145 rpm
Plasticizing capacity for PS:
At standard speed: 174 g/s
At higher speed (option): 246 g/s
Electro-hydraulic equipment:
Pump motor power: 132 kW
Heater power: 82 kW
Number of barrel heating zones: 7
Dry cycle time (according to Euromap 6): 765 cycles/h
Hydraulic oil tank capacity: 2440 l
Dimensions and weight:
Net weight (with control cabinet): 70 tons
Dimensions (length × width × height): 13.03 × 3.65 × 2.82 m
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2019
Senda fyrirspurn
Sími & Fax
+48 71 70... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp