SprautumótunarvélKraussMaffei
KM 650 - 2700 C2
Sprautumótunarvél
KraussMaffei
KM 650 - 2700 C2
framleiðsluár
2009
Ástand
Notað
Staðsetning
Eschweiler 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Sprautumótunarvél
- Framleiðandi:
- KraussMaffei
- Gerð:
- KM 650 - 2700 C2
- Framleiðsluár:
- 2009
- Ástand:
- tilbúinn til notkunar (notaður)
- Virkni:
- fullkomlega virkur
Verð og staðsetning
- Staðsetning:
- Hermann - Hollerith Str. 9, 52249 Eschweiler, Deutschland

Hringdu
Tæknilegar upplýsingar
- Klemmkraft:
- 6.500 kN
- Skrúfþvermál:
- 70 mm
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A18791466
- Tilvísunarnúmer:
- 14194
- Uppfærsla:
- síðast þann 24.03.2025
Lýsing
Clamping unit:
Clamping force 6500 kN
Mould opening force, max. 346 kN
Travel force movable platen opening 169 kN
Travel force movable platen closing 144 kN
Size of mould platens (h x v) 1520 x 1470 mm
Distance between tie bars (h x v) 1000 x 930 mm
Mould opening stroke 1150 mm
Mould height min 675 mm
Max. daylight 1825 mm
Hydraulic ejector - stroke 135 mm
Ejector force 226 kN
Bodpfov Stbmsx Adpjlr
Injection unit:
Screw diameter 70 mm
Ls/D ratio 23
Injection pressure 2389 bar
Stroke volume 1097 ccm
Shot weight (PS) 998 gr.
Injection rate 393 ccm/s
Screw speed 218 1/min
Plasticising rate max. 83 g/s
Nozzle pressure 173 kN
Electric and Hydraulic Equipment:
Nominal capacity of pump motor 75 kW
Installed heating capacity 36 kW
Adjustable barrel heating zones 7
Dimensions and weights:
Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m
Total machine weight 44000 kg
Accessories:
- Anti vibration pads
Additional options:
- 1 x air valve
- 8 x pneumatic sequentional valves
- Accumulator
- 2 x hydr. core pulls on movable plate
- 2 x hydr. core pulls on fix plate
- Robot interface according to EUROMAP 67
Clamping force 6500 kN
Mould opening force, max. 346 kN
Travel force movable platen opening 169 kN
Travel force movable platen closing 144 kN
Size of mould platens (h x v) 1520 x 1470 mm
Distance between tie bars (h x v) 1000 x 930 mm
Mould opening stroke 1150 mm
Mould height min 675 mm
Max. daylight 1825 mm
Hydraulic ejector - stroke 135 mm
Ejector force 226 kN
Bodpfov Stbmsx Adpjlr
Injection unit:
Screw diameter 70 mm
Ls/D ratio 23
Injection pressure 2389 bar
Stroke volume 1097 ccm
Shot weight (PS) 998 gr.
Injection rate 393 ccm/s
Screw speed 218 1/min
Plasticising rate max. 83 g/s
Nozzle pressure 173 kN
Electric and Hydraulic Equipment:
Nominal capacity of pump motor 75 kW
Installed heating capacity 36 kW
Adjustable barrel heating zones 7
Dimensions and weights:
Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m
Total machine weight 44000 kg
Accessories:
- Anti vibration pads
Additional options:
- 1 x air valve
- 8 x pneumatic sequentional valves
- Accumulator
- 2 x hydr. core pulls on movable plate
- 2 x hydr. core pulls on fix plate
- Robot interface according to EUROMAP 67
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2007
Senda fyrirspurn
Sími & Fax
+49 2403 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp




