Tætari, viðarhöggvarimütek
MGZ 1030 - 22 kW
Tætari, viðarhöggvari
mütek
MGZ 1030 - 22 kW
framleiðsluár
2025
Ástand
Notað
Staðsetning
Neckartailfingen 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Tætari, viðarhöggvari
- Framleiðandi:
- mütek
- Gerð:
- MGZ 1030 - 22 kW
- Framleiðsluár:
- 2025
- Ástand:
- næstum eins og nýtt (notað)
- Virkni:
- fullkomlega virkur
- Vinnustundir:
- 55 h
Verð og staðsetning
- Staðsetning:
- Grienweg 38, 72666 Neckartailfingen, Deutschland

Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A20648835
- Uppfærsla:
- síðast þann 01.12.2025
Lýsing
Machine with special rotor
Available immediately
Advantages:
+ Special rotor, with reduced knife protrusion, suitable for both hard and soft materials
+ 22 kW motor
+ Efficient square blades
*For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste.
Motor: 22 kW; 400 V - 50 Hz - 3 ph,
Screen: 15/20 mm or as agreed (10 to 40 mm possible)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Extraction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645mm
Sample image above: color of the unit may vary
Weight: 1,920 kg
Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta starter
- Fast hydraulic system
- Automatic shutdown in rotor idle mode
- Speed: 70–90 rpm for high throughput
- Cycle control to minimize idle times
- Performance-enhancing step control of hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
*Visible in the last 2 images.
- Additional blade row + €2,790
- Segmented bottom + €6,890
(recommended for materials with wall thickness less than 3 mm)
- Special K-rotor bearing + €3,480
(Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation)
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
Tsdpfx Aex Af Rdec Nef
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Synchronous start-stop with shredder)
- Enlarged feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Available immediately
Advantages:
+ Special rotor, with reduced knife protrusion, suitable for both hard and soft materials
+ 22 kW motor
+ Efficient square blades
*For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste.
Motor: 22 kW; 400 V - 50 Hz - 3 ph,
Screen: 15/20 mm or as agreed (10 to 40 mm possible)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Extraction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645mm
Sample image above: color of the unit may vary
Weight: 1,920 kg
Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta starter
- Fast hydraulic system
- Automatic shutdown in rotor idle mode
- Speed: 70–90 rpm for high throughput
- Cycle control to minimize idle times
- Performance-enhancing step control of hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
*Visible in the last 2 images.
- Additional blade row + €2,790
- Segmented bottom + €6,890
(recommended for materials with wall thickness less than 3 mm)
- Special K-rotor bearing + €3,480
(Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation)
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
Tsdpfx Aex Af Rdec Nef
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Synchronous start-stop with shredder)
- Enlarged feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2005
Senda fyrirspurn
Sími & Fax
+49 711 5... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp



