Briquetting pressamütek
MPP 180
Briquetting pressa
mütek
MPP 180
framleiðsluár
2024
Ástand
Nýtt
Staðsetning
Neckartailfingen 

Myndir sýna
Sýna kort
Upplýsingar um vélina
Verð og staðsetning
- Staðsetning:
- Grienweg 38, 72666 Neckartailfingen, Deutschland

Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A4041639
- Uppfærsla:
- síðast þann 13.05.2025
Lýsing
Good, used demonstration machine
Availability upon request
Very robust machine with high pressing force
- also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible.
Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to errors
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in use with satisfied customers
+ Top price-performance ratio
Supplement for demonstration cooling unit + €4,980 net,
(can also be retrofitted later)
* Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil
* Cooling unit recommended for regular use of more than 4 hours at a time.
Tariff number: 84793010,
Nwjdpfx Ajd Nm Sisatop
Briquette diameter: 70 mm,
Front bushing: 125 mm,
Max. briquette stroke: 100 mm,
Optional briquette stroke: 80 mm,
Capacity (depending on material): up to 150 kg/h*
*depending on bulk density,
*based on a bulk density of 200 kg per cubic meter.
.
Motor power: 9.2 kW,
400 volts / 50 Hz / 3-phase,
Length: 2095 mm,
Width: 1300 mm,
* with large chamber 1600 mm
Height: 1700 mm,
Weight: 1250 kg,
Oil capacity: 220 liters,
Silo diameter: 1200 mm
Silo capacity: approx. 1 cubic meter
Pump: 75 liters
Hydraulic pre-compressor
Cooling option for pressing tongs: yes, with optional coolable pressing tongs
Cooling option for hydraulic oil: yes
Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory)
Level monitoring option: yes
Extruded briquette option; Yes (depending on material)
Optional enlarged feed slide: Yes, with special accessory enlarged feed slide
CE compliant
Raw material requirements:
- The moisture content (dry) must be between a minimum of 6% and a maximum of 18%
- Maximum chip length: 20 mm
- Installation temperature: Temperature-controlled room at a minimum of +5°C
- The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Availability upon request
Very robust machine with high pressing force
- also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible.
Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to errors
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in use with satisfied customers
+ Top price-performance ratio
Supplement for demonstration cooling unit + €4,980 net,
(can also be retrofitted later)
* Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil
* Cooling unit recommended for regular use of more than 4 hours at a time.
Tariff number: 84793010,
Nwjdpfx Ajd Nm Sisatop
Briquette diameter: 70 mm,
Front bushing: 125 mm,
Max. briquette stroke: 100 mm,
Optional briquette stroke: 80 mm,
Capacity (depending on material): up to 150 kg/h*
*depending on bulk density,
*based on a bulk density of 200 kg per cubic meter.
.
Motor power: 9.2 kW,
400 volts / 50 Hz / 3-phase,
Length: 2095 mm,
Width: 1300 mm,
* with large chamber 1600 mm
Height: 1700 mm,
Weight: 1250 kg,
Oil capacity: 220 liters,
Silo diameter: 1200 mm
Silo capacity: approx. 1 cubic meter
Pump: 75 liters
Hydraulic pre-compressor
Cooling option for pressing tongs: yes, with optional coolable pressing tongs
Cooling option for hydraulic oil: yes
Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory)
Level monitoring option: yes
Extruded briquette option; Yes (depending on material)
Optional enlarged feed slide: Yes, with special accessory enlarged feed slide
CE compliant
Raw material requirements:
- The moisture content (dry) must be between a minimum of 6% and a maximum of 18%
- Maximum chip length: 20 mm
- Installation temperature: Temperature-controlled room at a minimum of +5°C
- The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2005
Senda fyrirspurn
Sími & Fax
+49 711 5... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
lítil auglýsing
Bitburg
2.234 km
Briquetting pressa
WEIMAC 140 - sofort verfügbar - Vorführgerät
WEIMAC 140 - sofort verfügbar - Vorführgerät
lítil auglýsing
Þýskaland
2.142 km
Briquetting pressa
WeimaC 150 rechts
WeimaC 150 rechts
lítil auglýsing
Heilbronn
2.415 km
Öll endurvinnsla tætara tætara
Josan40cm
Josan40cm
lítil auglýsing
Spánn
2.897 km
Einhliða brúnbandavél
HOMAGPROFI KAL310/9/A20 AIRTEC
HOMAGPROFI KAL310/9/A20 AIRTEC
lítil auglýsing
Bad Sooden-Allendorf
2.251 km
Poka sía
NestroNasf 4/3
NestroNasf 4/3
lítil auglýsing
Gorzów Wielkopolski
2.350 km
Stöðug vinnslustöð
RoblandBM 3000
RoblandBM 3000
lítil auglýsing
Neckartailfingen
2.467 km
Briquetting pressa
RUFRB 220
RUFRB 220
lítil auglýsing
Wioska
2.441 km
Framleiðslulínugluggi Weinig Conturex
CONTUREXWEINIG Conturex C114
CONTUREXWEINIG Conturex C114
lítil auglýsing
Gorzów Wielkopolski
2.350 km
Krosssag Stromab TR500+Matrix 6000
StromabTR500+Matrix 6000
StromabTR500+Matrix 6000
lítil auglýsing
Ítalía
3.247 km
Vinnslustöðvar með stjórnborði
HOMAGBOF 211/40/AP
HOMAGBOF 211/40/AP
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp









































































































