Afgreiðslukerfi fyrir merkimiðaprentun
4050S
Afgreiðslukerfi fyrir merkimiðaprentun
4050S
VB aukaskattur bætist við
6.650 EUR
Ástand
Notað
Staðsetning
Borken 

Myndir sýna
Sýna kort
Upplýsingar um vélina
Verð og staðsetning
VB aukaskattur bætist við
6.650 EUR
- Staðsetning:
- Dunkerstrasse 29, 46325 Borken/Burlo, DE
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A7379912
- Tilvísunarnúmer:
- 25075
- uppfærsla:
- síðast þann 11.04.2025
Lýsing
Bluhm Weber Legi-Air- 4050S Labeling Machine
4.14.1 Basic construction
The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
Ljdpfx Afsibh Tkswoah
The main valve terminal is located behind a service door below the control panel.
The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.
4.14.2 Functional sequence
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.
Bluhm Weber Legi-Air- 4050S
4.14.1 Basic construction
The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
Ljdpfx Afsibh Tkswoah
The main valve terminal is located behind a service door below the control panel.
The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.
4.14.2 Functional sequence
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.
Bluhm Weber Legi-Air- 4050S
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Senda fyrirspurn
Sími & Fax
+49 2862 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp