RANDEK SP700 höggsög
RANDEK SP700 höggsög
VB aukaskattur bætist við
13.900 EUR
framleiðsluár
1989
Ástand
Notað
Staðsetning
66140 Malax, Finnland 

Myndir sýna
Sýna kort
Upplýsingar um vélina
Verð og staðsetning
VB aukaskattur bætist við
13.900 EUR
- Staðsetning:
- Paxalvägen 39, 66140 Övermalax, FI
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A7897556
- uppfærsla:
- síðast þann 19.10.2024
Lýsing
RANDEK SP700 cut saw
manufacture Randek Sweden
Year 1989
SN 1989-02-08
Fpedpfx Adjivaryjksn
in good condition, cleaned and checked
Randek’s SP700 series provides reliable cut saws that are a major asset to roof
truss and house producers around the world.
The SP700 cut saw is effective, easy-to-use and accurate. It has been on the
market for a long time and is continuously improved in close contact with our
many customers. The blade on this semi-automatic saw supports angled cuts,
which mean it can make any cuts you may require.
You can also use the large diameter blade (700mm ) to cut several sections of stacked timber
simultaneously.
• Angled cuts from 0° to 360°
• Cut heights up to 250 mm, possible to cut three boards each cutting cycle
• PLC programmable saw
• Fixation of timber near the cutting area resulting in accurate cutting
roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m
out feeding roller conveyor 4,10m
Complete line: 11,5m
technical information under subject of correction
manufacture Randek Sweden
Year 1989
SN 1989-02-08
Fpedpfx Adjivaryjksn
in good condition, cleaned and checked
Randek’s SP700 series provides reliable cut saws that are a major asset to roof
truss and house producers around the world.
The SP700 cut saw is effective, easy-to-use and accurate. It has been on the
market for a long time and is continuously improved in close contact with our
many customers. The blade on this semi-automatic saw supports angled cuts,
which mean it can make any cuts you may require.
You can also use the large diameter blade (700mm ) to cut several sections of stacked timber
simultaneously.
• Angled cuts from 0° to 360°
• Cut heights up to 250 mm, possible to cut three boards each cutting cycle
• PLC programmable saw
• Fixation of timber near the cutting area resulting in accurate cutting
roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m
out feeding roller conveyor 4,10m
Complete line: 11,5m
technical information under subject of correction
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2007
Senda fyrirspurn
Sími & Fax
+49 176 6... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp