Hálfvagn

Wiese Baustoffauflieger mit Fassi Kran F240

Wiese Building Material Semi-Trailer

Fifth-wheel load: 12,000 kg
Axle load: 27,000 kg
Permissible gross vehicle weight: 39,000 kg
Curb weight: 10,840 kg
Loading platform length: approx. 9,200 mm
Overall length: approx. 10,600 mm
Internal width: 2,480 mm
Overall width: 2,550 mm

Kingpin
1 position with 2" kingpin
Coupling height
In horizontal position: approx. 1,160 mm
Top edge of main beam (without floor):
approx. 1,380 mm
Loading height:
approx. 1,410 mm

Lashing hole external frame D=30 mm with perforated strip at angle
(160 mm high / 30 mm floor recess / 4 mm wall thickness),
Main beam spacing
980 mm (center/center) - 1,130 mm (outer/outer)

Axles
3 axles, each with 9,000 kg load capacity
Brand: SAF with disc brakes D=430 mm
Track width: 2,040 mm
ABS: 1 axle sensed
Axle spacing: approx. 1,510 mm / approx. 1,510 mm

Suspension
Original SAF air suspension, with raise/lower valve
with retaining cables
Axle lift
Lifting axle, 1st axle, automatic load-dependent for starting assistance,
controllable via push button in driver’s cab

Steering
Mechanical forced steering on axle 2 + 3
Two-bar steering / Manufacturer: Tridec

Brake system
2-line Wabco compressed air braking system according to EU directive
71/320/EEC etc. with:
EBS/ABS 2S/2M with RSS function (Roll Stability Support)
and 7-pin socket
1x ISO coupling head yellow
1x ISO coupling head red
Spring-loaded parking brake on 2 axles
all fitted with quick couplings
Aluminum air reservoir

Air system
Compressed air installation with:
1x raise/lower valve
1x level control valve
Aluminum air reservoir
all fitted with quick couplings
Automatic lowering of air suspension during crane operation

Tires
6 units type: 385/65 R22.5"
Brand: at manufacturer’s choice
Tire pressure monitoring system for all 6 tires,
Lhedpfxeyl D Eys Ad Dec
display in driver’s cab

Rims
6x steel rim 11.75x22.5", 10-hole, center-mounted, offset: 120mm

Support device
Mechanical landing legs with T-swivel foot, permitted lift load: 2x 12,000 kg
Operable from one side, two speeds
Brand:
at manufacturer’s choice

Wheel covers & mud flaps
6x plastic half-shell wheel covers
Mudguard mounting reinforced with flat steel
Note: mudguard on steered axle 3 with internal cutout

Lighting system
24V lighting system according to EU directive 76/756/EEC etc. with:
2x multi-chamber tail lamps
Lane marker lamps
License plate lighting
LED side marker lamps with indicator function
2x 7-pin and 1x 15-pin connector installed as per EU standard
Tail lights mounted in reinforced light carrier = certified rear underrun protection
All necessary markings

Additional installation:
Electrical connection for crane control pre-installed as specified!

Safety equipment
Side underrun protection and rear underrun protection in aluminum according to EU directives

Floor
OKULEN floor 32 mm

Superstructure
Straight front wall, 1,200 mm high, welded solid,
consisting of 4x steel profiles,
welded to the front plate with aluminum hollow profile as infill
Inside a 625 mm high wear plate, galvanized steel
Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading
Straight rear wall, 1,100 mm high, welded solid, consisting
of 4x steel profiles, welded to rear plate and aluminum hollow profile as infill
Inside a 625 mm high wear plate, galvanized steel
Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading,
2x3 aluminum side walls, 1,100 mm, foldable and lowerable
On rear side panels, left and right,
folding steps as access and grab ha

Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.