Leysir núll samskeyttur hluti skábrúnirMafell Kluge
HIT M
Leysir núll samskeyttur hluti skábrúnir
Mafell Kluge
HIT M
Ástand
sýningavél
Staðsetning
Schwaz 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Leysir núll samskeyttur hluti skábrúnir
- Framleiðandi:
- Mafell Kluge
- Gerð:
- HIT M
- Ástand:
- næstum eins og ný (sýningavél)
- Virkni:
- fullkomlega virkur
- Vinnustundir:
- 7 h
Verð og staðsetning
- Staðsetning:
- Dorf, 6134 Vomp, Österreich

- leiga:
- mögulegt
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A4112285
- Uppfærsla:
- síðast þann 21.11.2025
Lýsing
Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting
A machining table is also available as an option
- Heating time:ᐸ30Sekunden
- max. edge height 65mm (option 103mm), max. edge thickness 3mm
- Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges)
- higher heat resistance and water resistance
- perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed.
- sloping cut surfaces of up to 55° (installation in the available table)
- high process reliability & lower follow-up costs;
- no glue change necessary = almost no set-up costs;
- no burning of the glue;
- no glue residue on the workpiece
- Infinitely variable feed speed from 1 to 5.5 m/min.
- continuously adjustable hot air up to 520°C
- 230VoltAC, 4m connection cable, compressed air hose
- 3,05kW
- low air requirement, assembly compressor is sufficient
The zero joint unit can be used mobile as well as micro-stationary!
Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery.
Tjdpfxsd St R Se Ac Nef
The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
A machining table is also available as an option
- Heating time:ᐸ30Sekunden
- max. edge height 65mm (option 103mm), max. edge thickness 3mm
- Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges)
- higher heat resistance and water resistance
- perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed.
- sloping cut surfaces of up to 55° (installation in the available table)
- high process reliability & lower follow-up costs;
- no glue change necessary = almost no set-up costs;
- no burning of the glue;
- no glue residue on the workpiece
- Infinitely variable feed speed from 1 to 5.5 m/min.
- continuously adjustable hot air up to 520°C
- 230VoltAC, 4m connection cable, compressed air hose
- 3,05kW
- low air requirement, assembly compressor is sufficient
The zero joint unit can be used mobile as well as micro-stationary!
Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery.
Tjdpfxsd St R Se Ac Nef
The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Skjöl
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2016
Senda fyrirspurn
Sími & Fax
+43 5242 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp































