Loftstengur heftariMEROLOCK
3
Loftstengur heftari
MEROLOCK
3
Föst verð aukaskattur bætist við
266 EUR
Framleiðsluár
2001
Ástand
Notað
Staðsetning
Wymysłów 

Grunnupplýsingar
- Heiti vélar:
- Loftstengur heftari
- Framleiðandi:
- MEROLOCK
- Gerð:
- 3
- Framleiðsluár:
- 2001
- Ástand:
- gott (notað)
Verð og staðsetning
Föst verð aukaskattur bætist við
266 EUR
- Staðsetning:
- Wymysłów 10, 62-740 Tuliszków, Polska

Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A22978962
- Tilvísunarnúmer:
- mb-ce083084-17853881
- Uppfærsla:
- síðast þann 15.10.2026
Lýsing
Top-feeding stapler with clamping anvils. For use with collated staples. Used to close filled folding cartons made of single and double-wall corrugated cardboard.
Economical solution for closing corrugated cardboard boxes with interlocking and overlapping flaps using clamping anvils. Suitable for single and double-wall corrugated cardboard.
Adjustable penetration depth to suit the type of cardboard.
Ideally suited for use in packaging lines where a high degree of accessibility and efficiency is required.
Isdpfx Ajz Skpwsnisbc
• Housing made of hardened steel for long-lasting durability.
• Clamping anvils return immediately: up to 20 stapling cycles per minute.
• 1000 staples per coil: up to 10 times less frequent reloading compared to conventional staplers.
For comfortable operation, use a balancer in combination with a swivel arm system and a suitable spiral hose. See > accessories.
MEROLOCK pneumatic stapler
• For CR 1/34 spiral staples, arm length 18 mm,
• With noise silencer
• With automatic clamping anvil return.
• The clamping anvils are specially hardened, which extends their service life.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Economical solution for closing corrugated cardboard boxes with interlocking and overlapping flaps using clamping anvils. Suitable for single and double-wall corrugated cardboard.
Adjustable penetration depth to suit the type of cardboard.
Ideally suited for use in packaging lines where a high degree of accessibility and efficiency is required.
Isdpfx Ajz Skpwsnisbc
• Housing made of hardened steel for long-lasting durability.
• Clamping anvils return immediately: up to 20 stapling cycles per minute.
• 1000 staples per coil: up to 10 times less frequent reloading compared to conventional staplers.
For comfortable operation, use a balancer in combination with a swivel arm system and a suitable spiral hose. See > accessories.
MEROLOCK pneumatic stapler
• For CR 1/34 spiral staples, arm length 18 mm,
• With noise silencer
• With automatic clamping anvil return.
• The clamping anvils are specially hardened, which extends their service life.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp











