RúmborðsfresariMTE
Kompakt Plus
Rúmborðsfresari
MTE
Kompakt Plus
Framleiðsluár
2004
Ástand
Notað
(fullkomlega virkur)
Staðsetning
Nordrhein-Westfalen 

Fylgjast með uppboði
Grunnupplýsingar
- Heiti vélar:
- Rúmborðsfresari
- Framleiðandi:
- MTE
- Gerð:
- Kompakt Plus
- Vélar númer:
- 04120594
- Framleiðsluár:
- 2004
- Ástand:
- tilbúinn til notkunar (notaður)
- Virkni:
- fullkomlega virkur
- Vinnustundir:
- 29.337 h
Tæknilegar upplýsingar
Spindlar
Spindilhraði (hámark):
12.000 snúningur/mín.
Áss upplýsingar
X-áss færi:
2.000 mm
Y-áss færsla:
895 mm
Förfaravegalengd Z-áss:
895 mm
Frekari upplýsingar
Stýrislíkarlíkan:
Heidenhain iTNC 530
veiting
- Staðsetning:
- Nordrhein-Westfalen, Þýskaland
– Fjarlægð: um 2.128 km
- Aðgengi:
- strax eftir að uppboði lýkur
- Afhendingarskilmálar:
- EXW
Afgreiðslu- og fermingarkostnaður:
Afhending á staðnum:
ókeypis
ókeypis
Sendingarkostnaður:
Lýsing
TECHNICAL DETAILS
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Hfodpfx Afe Aknvwoxsp
Control system operating hours: 132,104 h
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
The machine is still in productive use.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Hfodpfx Afe Aknvwoxsp
Control system operating hours: 132,104 h
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
The machine is still in productive use.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Greiðsla meðhöndlun
- Aukakostnaður við kaup:
- 18 %
- Greiðsluskilmálar:
- 100 % fyrirframgreiðsla
- Greiðslumáti:
Bankafærslu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A23342642
- Tilvísunarnúmer:
- AUC-2611420
- Uppfærsla:
- síðast þann 16.11.2026
- Einkar tilboð:
- aðeins í boði á uppboði
skoðun
Skoðun möguleg
Vél er rafmagnstengd
Machineseeker mælir almennt með því að vélar séu skoðaðar.
Allar upplýsingar eru gefnar eftir bestu vitund og samvisku – sannreyndu sjálf(ur) á staðnum.
Þessar auglýsingar gætu einnig vakið áhuga þinn.
Fullgengt
Skilaboðin þín hafa verið send.
Lítil auglýsing
Dortmund
2.127 km
CNC rúmfræsivél
MTEKompakt Plus
MTEKompakt Plus
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp























