EndurvinnsluþrýstipressaNext Generation Recyclingmaschinen GmbH
F:Gran 145-20
Endurvinnsluþrýstipressa
Next Generation Recyclingmaschinen GmbH
F:Gran 145-20
EXW föst verð aukaskattur bætist við
150.000 EUR
Framleiðsluár
2013
Ástand
Notað
(takmörkuð virkni)
Staðsetning
Bergen op Zoom 

Upplýsingar um vélina
- Heiti vélar:
- Endurvinnsluþrýstipressa
- Framleiðandi:
- Next Generation Recyclingmaschinen GmbH
- Gerð:
- F:Gran 145-20
- Vélar númer:
- 12090
- Framleiðsluár:
- 2013
- Ástand:
- þarf viðgerð (notað)
- Virkni:
- takmörkuð virkni
- Vinnustundir:
- 7.700 h
Verð og staðsetning
EXW föst verð aukaskattur bætist við
150.000 EUR
- Staðsetning:
- Bergen op Zoom, Holland

Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A22402837
- Tilvísunarnúmer:
- Z032
- Uppfærsla:
- síðast þann 23.07.2026
Lýsing
This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago.
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Fsdeznz Ezjpfx Acyegf
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Fsdeznz Ezjpfx Acyegf
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Skjöl
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2026
15 Auglýsingar á netinu
Senda fyrirspurn
Sími & Fax
+43 660 2... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
Lítil auglýsing
Þýskaland
2.280 km
Ýmis tæki
KahlTwin Screw Extruder LTW 160
KahlTwin Screw Extruder LTW 160
Lítil auglýsing
Premnitz
2.241 km
Extrusion verksmiðja
BARMAGKEP 200-26,3,3-S
BARMAGKEP 200-26,3,3-S
Lítil auglýsing
Waidhofen an der Ybbs
2.750 km
Segulskiljari og snertilstraumsskiljari
BLUELINEEDDY CENTRIC
BLUELINEEDDY CENTRIC
Lítil auglýsing
Malıköy Başkent OSB
4.284 km
SUNDUR METALLA ÁN JÁRNVIRKNI MEÐ SNÚÐSTRAUMUM
BASECS-EC-1000-12-VF
BASECS-EC-1000-12-VF
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp


















































