Plata leiðinlegur vél - láréttPAMA
4/TR 25
Plata leiðinlegur vél - lárétt
PAMA
4/TR 25
framleiðsluár
2007
Ástand
Notað
Staðsetning
Þýskaland 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Plata leiðinlegur vél - lárétt
- framleiðandi:
- PAMA
- Gerð:
- 4/TR 25
- framleiðsluár:
- 2007
- Ástand:
- gott (notað)
Verð og staðsetning
- Staðsetning:
- Deutschland
Hringdu
Vélasala

Hefur þú þegar auglýst notaða vélina þína?
Seldu í gegnum Machineseeker án þóknunar.
Meira um sölu á vélum
Meira um sölu á vélum
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A19583366
- Tilvísunarnúmer:
- 1058-25154
- uppfærsla:
- síðast þann 18.08.2025
Lýsing
control 840 D
Technical data:
The travel in the x-direction is 4000 mm, in the y-direction 3000 mm and in the
z-direction 2000 mm. The quill stroke is 800 mm. The distance from the spindle
center to the clamping surface is a minimum of 80 mm and a maximum of 3080 mm.
Dsdpfx Agowzyphewocn
The maximum workpiece weight is 20000 kg.
The worktable is rectangular (HEHM) with a clamping surface 2500 mm long and
2000 mm wide. There are 12 T-slots according to DIN with a slot width of 28 mm
and a slot spacing of 160 mm. The table height above floor level is 800 mm. The
table can be swiveled through 360°.
The work spindle has an ISO 50 tool holder in accordance with DIN 69871-A40.
The spindle diameter is 160 mm. The maximum torque absorption is 2346 Nm. The
spindle cannot be swiveled.
Technical data:
The travel in the x-direction is 4000 mm, in the y-direction 3000 mm and in the
z-direction 2000 mm. The quill stroke is 800 mm. The distance from the spindle
center to the clamping surface is a minimum of 80 mm and a maximum of 3080 mm.
Dsdpfx Agowzyphewocn
The maximum workpiece weight is 20000 kg.
The worktable is rectangular (HEHM) with a clamping surface 2500 mm long and
2000 mm wide. There are 12 T-slots according to DIN with a slot width of 28 mm
and a slot spacing of 160 mm. The table height above floor level is 800 mm. The
table can be swiveled through 360°.
The work spindle has an ISO 50 tool holder in accordance with DIN 69871-A40.
The spindle diameter is 160 mm. The maximum torque absorption is 2346 Nm. The
spindle cannot be swiveled.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Senda fyrirspurn
Sími & Fax
+49 7246 ... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
lítil auglýsing

2.135 km
Bor- og fræsunarstöð
PAMASpeedmat 4/TR 25
PAMASpeedmat 4/TR 25
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp