GírhelluvélPfauter
PE 150 1991 renewed 2009
Gírhelluvél
Pfauter
PE 150 1991 renewed 2009
framleiðsluár
1991
Ástand
Notað
Staðsetning
Düsseldorf 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Gírhelluvél
- framleiðandi:
- Pfauter
- framleiðsluár:
- 1991
- Ástand:
- mjög gott (notað)
- virkni:
- fullkomlega virkur
Verð og staðsetning
- Staðsetning:
- Akademiestraße 3, 40213 Düsseldorf, DE
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A17687438
- uppfærsla:
- síðast þann 23.07.2025
Lýsing
Machine still under power and production can be seen at any time.
Technical Data – PE 150
This hobbing machine with automatic workpiece change system is designed for series production of workpieces, for which the corresponding drawings have been received.
Our specialists for automatic workpiece changing systems will gladly assist you if you wish to convert the machine for milling different workpieces.
Hob Cutter:
Max. permitted cutter outside diameter: 130 mm
Max. length (depending on cutter arbor diameter): 220 mm
Slide Travel:
Radial (X-axis): 150 mm
Tangential (Y-axis): 170 mm
Axial (Z-axis): 200 mm
Gkodpfx Adsu N E Rrsksc
Max. Swivel Angle of Milling Head:
In +A direction: 30°
In -A direction: 45°
Workpiece Table:
Outer diameter: 160 mm
Bore diameter: 63 mm
Overall Dimensions of the Machine:
Length: 5,820 mm
Width: 4,047 mm
Height: 2,810 mm
Approximate Weight of Machine:
8,000 kg
Speeds:
Feeds:
Axes X, Y, and Z: 1 to 3,000 mm/min
Rapid Traverses:
Axes X, Y, and Z: 3,000 mm/min
Spindle Speeds:
Tool (S-spindle): 150 to 600 rpm
Workpiece table (C-axis): 1 to 125 rpm
Electrical Equipment:
Operating voltage: 400 V
Supply voltage: 230 V
Control voltage: 24 V
Frequency: 50 Hz
Connected load of the machine: 48.5 kVA
Cable cross-section: 25 mm²
Fusing: 100 A
Technical Data – PE 150
This hobbing machine with automatic workpiece change system is designed for series production of workpieces, for which the corresponding drawings have been received.
Our specialists for automatic workpiece changing systems will gladly assist you if you wish to convert the machine for milling different workpieces.
Hob Cutter:
Max. permitted cutter outside diameter: 130 mm
Max. length (depending on cutter arbor diameter): 220 mm
Slide Travel:
Radial (X-axis): 150 mm
Tangential (Y-axis): 170 mm
Axial (Z-axis): 200 mm
Gkodpfx Adsu N E Rrsksc
Max. Swivel Angle of Milling Head:
In +A direction: 30°
In -A direction: 45°
Workpiece Table:
Outer diameter: 160 mm
Bore diameter: 63 mm
Overall Dimensions of the Machine:
Length: 5,820 mm
Width: 4,047 mm
Height: 2,810 mm
Approximate Weight of Machine:
8,000 kg
Speeds:
Feeds:
Axes X, Y, and Z: 1 to 3,000 mm/min
Rapid Traverses:
Axes X, Y, and Z: 3,000 mm/min
Spindle Speeds:
Tool (S-spindle): 150 to 600 rpm
Workpiece table (C-axis): 1 to 125 rpm
Electrical Equipment:
Operating voltage: 400 V
Supply voltage: 230 V
Control voltage: 24 V
Frequency: 50 Hz
Connected load of the machine: 48.5 kVA
Cable cross-section: 25 mm²
Fusing: 100 A
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2021
Senda fyrirspurn
Sími & Fax
+49 211 3... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp