LaserskurðarvélPrima Power
CV 5000
Upplýsingar um vélina
- Heiti vélar:
- Laserskurðarvél
- Framleiðandi:
- Prima Power
- Gerð:
- CV 5000
- Vélar númer:
- 150204
- Framleiðsluár:
- 2016
- Ástand:
- tilbúinn til notkunar (notaður)
- Virkni:
- fullkomlega virkur
- Vinnustundir:
- 27.875 h
Tæknilegar upplýsingar
- Lasertegund:
- CO₂ leysir
- Leiserbylgjulengd:
- 10 nm
veiting
- Staðsetning:
- Hessen, Þýskaland
– Fjarlægð: um 2.322 km
- Aðgengi:
- strax eftir að uppboði lýkur
- Afhendingarskilmálar:
- FCA
2.000,00 EUR (bindandi)
ókeypis
Lýsing
No reserve price - guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Laser type: CO₂ laser
Average power: 200–5,000 W
Peak power: up to 6 kW
Wavelength: 10.6 µm
Beam quality factor M²:< 2.4 (typically 2.1–2.3)
Beam divergence: 1.5 mrad (half angle)
Beam diameter at output: 15 mm (1/e)
Beam diameter at output: 21 mm (full beam)
Pulse repetition rate: 0–2 kHz
Pulse width: 250 µs
Pulse resolution: 70 µs (?)
Alignment stability: ± 150 µrad (?)
Wavelength: 635 nm
Output power:< 1 mW
MACHINE DETAILS
Ambient temperature: 10–40 °C
Relative humidity:< 95% (non-condensing)
Connected load: 37 kW
Voltage: 400–460 V AC
Voltage tolerance: ± 10%
Power supply: 3-phase
Required cooling capacity: 45 kW
Flow rate: 133 l/min
Inlet temperature: 18–20 °C
Maximum inlet pressure: 6 bar
Nominal inlet pressure: 3 bar
Differential pressure: 1.5 bar
Coolant: Distilled water with 35% Dowfrost HD
Filter rating: 100 µm
Helium purity: 99.996%
Helium concentration: 67.7%
Helium consumption: 13.4–46.8 SLPH
Carbon monoxide purity: 99.995%
Carbon monoxide concentration: 4.1%
Carbon monoxide consumption: 0.9–3.0 SLPH
Nitrogen purity: 99.996%
Nitrogen concentration: 28.2%
Nitrogen consumption: 5.8–20.2 SLPH
Total gas consumption: 20–70 SLPH
Maximum content of water vapor, hydrocarbons, and oxygen:< 10 ppm
Compressed air: dry
Compressed air dew point:< 2 °C
Operating hours (according to meter): 27,875 h
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Greiðsla meðhöndlun
- Aukakostnaður við kaup:
- 18 %
- Greiðsluskilmálar:
- 100 % fyrirframgreiðsla
- Greiðslumáti:
Bankafærslu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A22382937
- Tilvísunarnúmer:
- AUC-2607179
- Uppfærsla:
- síðast þann 21.07.2026
- Einkar tilboð:
- aðeins í boði á uppboði
skoðun
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-traustmerki
Hvað er traustvottorð?
Machineseeker vottar valda söluaðila með traustsvottun Machineseeker. Áður en úthlutað er framkvæma reyndir starfsmenn Machineseeker staðlaða og yfirgripsmikla skoðun.
Hvað skoðum við?
Staðfesting á
rekstrarleyfi eða útdrætti úr firmaskrá
Yfirferð á
póstfangi seljanda
Staðfesting á
bankatengingu
Staðfesting á
símalegu
aðgengi að aðalnúmerinu
Efnahagsupplýsingar
mega ekki innihalda neikvæða eiginleika
Kaupendur kvartanir
geta leitt til þess að vottunin verði afturkölluðHvað þýðir þetta fyrir þig sem kaupanda?
Með Machineseeker-traustmerkinu getur þú sem kaupandi þekkt áreiðanlega seljendur, jafnvel án eigin athugunar, sem líklega stunda heiðarlega og réttláta viðskiptahætti.
Auðvitað geta samt sem áður orðið ágreiningar á meðan á kaupferlinu stendur. Machineseeker ber ekki ábyrgð á brotum á lögum sem virkir kaupendur eða seljendur á Machineseeker kunna að fremja.