S-60K (5)Riko Ekos d.o.o
S-60K (5)
S-60K (5)
Riko Ekos d.o.o
S-60K (5)
Framleiðsluár
2019
Ástand
Notað
Staðsetning
Þýskaland 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- S-60K (5)
- Framleiðandi:
- Riko Ekos d.o.o
- Gerð:
- S-60K (5)
- Framleiðsluár:
- 2019
- Ástand:
- gott (notað)
- Virkni:
- fullkomlega virkur
- Vinnustundir:
- 673 h
Verð og staðsetning
- Staðsetning:
- , Þýskaland

Hringdu
Tæknilegar upplýsingar
- Pressukraftur:
- 60 t
- Fyllingarop breidd:
- 1.100 mm
- Fylliopnunarlengd:
- 1.400 mm
- Ballabreidd:
- 720 mm
- Balahæð:
- 1.100 mm
- Heildarþyngd:
- 12.500 kg
- Olíugeymisrýmd:
- 800 l
- Afl:
- 37 kW (50,31 hP)
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A17766626
- Uppfærsla:
- síðast þann 20.11.2024
Lýsing
Technical data baler:
Manufacturer Riko Ekos d.o.o
Type S-60K (5)
Year of construction 2019
Operating hours 673 hours, as of August 24
Number of pressed bales 1,127 bales, as of August 24
Pressing force main press 60 tonnes
Dimensions of feed chute 1,100 x 1,400 mm
Filling volume / pressing cycle 2.1 m³
Bale dimensions 720 x 1,100 mm (W x H), the length is variable
Drive power 37 kW
Connected load, total 47 kW
Tying 4-fold horizontal, fully automatic
Throughput capacity with a
bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour
Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour
Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour
Filling volume of hydraulic oil tank 800 litres
PLC control Siemens SIMATIC S7-1200
Siemens SIMATIC HMI control panel
Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H)
Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H)
Transport weight press 12.5 tonnes
Lhodeu Thicepfx Ab Tsb
Condition of the baler:
The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use.
Scope of delivery for the baler:
1 piece baler without conveyor belt, hopper and chute
8 pieces wire pulling stations, without wire
1 piece bale chute
1 set of machine documentation
Comments:
The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
Manufacturer Riko Ekos d.o.o
Type S-60K (5)
Year of construction 2019
Operating hours 673 hours, as of August 24
Number of pressed bales 1,127 bales, as of August 24
Pressing force main press 60 tonnes
Dimensions of feed chute 1,100 x 1,400 mm
Filling volume / pressing cycle 2.1 m³
Bale dimensions 720 x 1,100 mm (W x H), the length is variable
Drive power 37 kW
Connected load, total 47 kW
Tying 4-fold horizontal, fully automatic
Throughput capacity with a
bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour
Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour
Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour
Filling volume of hydraulic oil tank 800 litres
PLC control Siemens SIMATIC S7-1200
Siemens SIMATIC HMI control panel
Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H)
Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H)
Transport weight press 12.5 tonnes
Lhodeu Thicepfx Ab Tsb
Condition of the baler:
The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use.
Scope of delivery for the baler:
1 piece baler without conveyor belt, hopper and chute
8 pieces wire pulling stations, without wire
1 piece bale chute
1 set of machine documentation
Comments:
The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
Skjöl
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Senda fyrirspurn
Sími & Fax
+31 597 2... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
Lítil auglýsing
Þýskaland
2.341 km
Baler
DIXI40 SLK
DIXI40 SLK
Lítil auglýsing
Heilbronn
2.415 km
Kapalflögnunarvél Kapaleinangrunarvél
Josan120
Josan120
Lítil auglýsing
Holland
1.955 km
Rúllupressa með 8-faldri krossbindingu
Presona ABLP 80 VHK 1
Presona ABLP 80 VHK 1
Lítil auglýsing
Schorfheide
2.272 km
Kyrrstæð blöndunarstöð
Sonstige/OtherFrumecar Fastmix DIE BETONTANKSTELLE
Sonstige/OtherFrumecar Fastmix DIE BETONTANKSTELLE
Lítil auglýsing
Navan
1.435 km
Einskaft tætari
WEIMASpider WLK 1500
WEIMASpider WLK 1500
Lítil auglýsing
Brăila
3.574 km
Flexographic press
RosenRS-F-8+1
RosenRS-F-8+1
Lítil auglýsing
Wuppertal
2.137 km
Endurvinnslupressuvél - kornunarverksmiðja / kaskad
AGRIFONAM-145
AGRIFONAM-145
Lítil auglýsing
Fohnsdorf
2.818 km
Ruslpressa
ATM Recyclingsystems GmbHPaketierpresse SP 100 AK-2
ATM Recyclingsystems GmbHPaketierpresse SP 100 AK-2
Lítil auglýsing
Velbert
2.131 km
Baler
Presona ABLP 80 VH1
Presona ABLP 80 VH1
Lítil auglýsing
Bratislava
2.834 km
Mulningarverksmiðja
SBMJAWMAX 450 - Diesel/Electric !
SBMJAWMAX 450 - Diesel/Electric !
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp


































































































































