Sjálfvirkar duftbásar

ROMER / Catalog prices

Automation
Use of one photocell
Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme
Array of guns Vertical
8pcs. pistols
Control - profiControl 10 "
Cyclone - CK-D1250
Dust collector - OZ-8H
Center - RP-01 + SV-200
MA1-23 x 2 pcs manipulator
Os X MX-100 x2 pcs.
Horizontal goal - Horizontal goal W400 x2 items
Vertical gate - H2000 vertical gate
The maximum painting speed is 1,65714285714286m / min
0 piece pulling machines
Pow. requires 10188m3 / h to fly
Required min. cabin passage W900mm H2100mm
Pipe diameter 500mm - 16.9m / s minimum 16m / s
Air consumption 1210 L / min + Sug. SC-20 compressor
Bedoflq Spjpfx Adpodk
Min.current connection 28.14 kW
Identification of details using special tags.
A plate with identification holes is placed over the suspension.
Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating.
Vertical detection of the detail of the workpiece.
The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece.
The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.
Application of light gates with multiple sensors horizontally and vertically.
This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators.
Benefits of using gates and photocells
The benefits of using photocells or light gates are primarily energy and powder savings.
Eliminate painting of a zone in which there is no detail.
With the use of light gates, precise control of the guns.
Our lines can be optionally equipped with photocells, or light gates
Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.
Identification of details using special tags.
A plate with identification holes is placed over the suspension.
Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.
The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.
Using of light gates with multiple sensors horizontally and vertically
This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.
The benefits of using photocells or light gates are primarily powder and energy savings
Eliminate painting of a zone in which there is no detail
With the use of light gates, precise control of the guns.