Pneumatískt hallanlegt samsetningarborð frá Ruchser með rúllubrautar-flutningsstöð MKSEA 2 + RWGAT45Ruchser
RWGAT45-20 +MKSEA 2
Pneumatískt hallanlegt samsetningarborð frá Ruchser með rúllubrautar-flutningsstöð MKSEA 2 + RWGAT45
Ruchser
RWGAT45-20 +MKSEA 2
föst verð aukaskattur bætist við
6.800 EUR
Framleiðsluár
2013
Ástand
Notað
Staðsetning
Gütersloh 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Pneumatískt hallanlegt samsetningarborð frá Ruchser með rúllubrautar-flutningsstöð MKSEA 2 + RWGAT45
- Framleiðandi:
- Ruchser
- Gerð:
- RWGAT45-20 +MKSEA 2
- Framleiðsluár:
- 2013
- Ástand:
- notaður
Verð og staðsetning
föst verð aukaskattur bætist við
6.800 EUR
- Staðsetning:
- Gütersloh, Germany

Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A21727458
- Tilvísunarnúmer:
- 80067
- Uppfærsla:
- síðast þann 16.04.2026
Lýsing
Table, rotatable, extendable, and tiltable
Dimensions Base dimensions: 2000 x 1750 mm
Dimensions (max extended): 4500 x 2500 mm
Max. payload when tipping: 250 kg
Max. load capacity when lifting: 370 kg
Equipment conveyance roller tracks:
Rear arrangement consisting of 2 rubber roller strips at heights of 400 and 1700 mm above the support surface for models RU-RGAT...Ü for door lines.
Roller rails mounted in front of the uprights at 120 mm spacing.
Pre-feed version with automatically retracting plant part during feeding with the table.
Roller conveyor on the installation surface made of zinc-plated steel rollers, roller length 200 mm, 2-part split without gap at the split, roller diameter 50 mm, distance between rollers 200 mm.
Roller conveyor front open for driving in with the assembly table at the element transfer.
Roller height adjustable from 330 to 380 mm.
Ijdpfsy Dcicex Aageia
Roller conveyor wagon equipped with 4 flange rollers, of which 2 with locking
Dimensions Base dimensions: 2000 x 1750 mm
Dimensions (max extended): 4500 x 2500 mm
Max. payload when tipping: 250 kg
Max. load capacity when lifting: 370 kg
Equipment conveyance roller tracks:
Rear arrangement consisting of 2 rubber roller strips at heights of 400 and 1700 mm above the support surface for models RU-RGAT...Ü for door lines.
Roller rails mounted in front of the uprights at 120 mm spacing.
Pre-feed version with automatically retracting plant part during feeding with the table.
Roller conveyor on the installation surface made of zinc-plated steel rollers, roller length 200 mm, 2-part split without gap at the split, roller diameter 50 mm, distance between rollers 200 mm.
Roller conveyor front open for driving in with the assembly table at the element transfer.
Roller height adjustable from 330 to 380 mm.
Ijdpfsy Dcicex Aageia
Roller conveyor wagon equipped with 4 flange rollers, of which 2 with locking
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp















