SíunarkerfiSand filtration
Sand filtration 400 m3/h
Síunarkerfi
Sand filtration
Sand filtration 400 m3/h
VB aukaskattur bætist við
90.000 EUR
Ástand
Notað
Staðsetning
Ostrava 

Myndir sýna
Sýna kort
Upplýsingar um vélina
Verð og staðsetning
VB aukaskattur bætist við
90.000 EUR
- Staðsetning:
- Ostrava, Česko
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A19999760
- uppfærsla:
- síðast þann 15.09.2025
Lýsing
Total flow of clarified water through PF 1 – 5 or PF 6 – 9 is 400 m³/h.
Filter diameter: 3,000 mm
Filter media - type PR 1 – 1.6
- Grain size: 1 – 1.6 mm
- Bed height: 1,100 mm
Operation:
Ijdexcnauopfx Afwsbc
Maximum filter capacity: 100 m³/h
Filtration rate: 14.3 m/h
Backwashing:
Backwash water flow: 70 m³/h
Upflow velocity: 10 m/h
Backwash air flow: 385 Nm³/h
The PF units are divided into two sections: PF1-5 (old installation) and PF6-9 (new installation). Only one section operates at a time according to operational requirements. The overall workload is approximately balanced, so each section runs about 4,400 hours annually. The sand filters are regularly backwashed after each operational cycle (80 hours) or when the pressure loss reaches ΔP 25 kPa. The system is fully operational.
PF Reconstruction:
PF1-5: 10.11.2015 – complete replacement of sand, nozzles, and shell surface maintenance
PF6-9: 13.7.2018 – complete replacement of sand, nozzles, and shell surface maintenance.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Filter diameter: 3,000 mm
Filter media - type PR 1 – 1.6
- Grain size: 1 – 1.6 mm
- Bed height: 1,100 mm
Operation:
Ijdexcnauopfx Afwsbc
Maximum filter capacity: 100 m³/h
Filtration rate: 14.3 m/h
Backwashing:
Backwash water flow: 70 m³/h
Upflow velocity: 10 m/h
Backwash air flow: 385 Nm³/h
The PF units are divided into two sections: PF1-5 (old installation) and PF6-9 (new installation). Only one section operates at a time according to operational requirements. The overall workload is approximately balanced, so each section runs about 4,400 hours annually. The sand filters are regularly backwashed after each operational cycle (80 hours) or when the pressure loss reaches ΔP 25 kPa. The system is fully operational.
PF Reconstruction:
PF1-5: 10.11.2015 – complete replacement of sand, nozzles, and shell surface maintenance
PF6-9: 13.7.2018 – complete replacement of sand, nozzles, and shell surface maintenance.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2025
Senda fyrirspurn
Sími & Fax
+420 370 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp