Viðar tætariSchliesing
235 MX-D
Viðar tætari
Schliesing
235 MX-D
framleiðsluár
2022
Ástand
sýningavél
Staðsetning
Bad Lippspringe 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Viðar tætari
- framleiðandi:
- Schliesing
- Gerð:
- 235 MX-D
- Vélar númer:
- 227057
- framleiðsluár:
- 2022
- Ástand:
- næstum eins og ný (sýningavél)
- virkni:
- fullkomlega virkur
- Vinnustundir:
- 26 h
Verð og staðsetning
- Staðsetning:
- Schulze-Delitzsch-Weg 4, 33175 Bad Lippspringe, Deutschland
- leiga:
- mögulegt
Hringdu
Vélasala

Fannstu nýja vél? Nú breytir þú því gamla í peninga.
Náðu bestu verði í gegnum Machineseeker.
Meira um sölu á vélum
Meira um sölu á vélum
Tæknilegar upplýsingar
- Afl:
- 18,5 kW (25,15 hP)
- Eldsneytistegund:
- dísel
- Litur:
- gult
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A18175916
- Tilvísunarnúmer:
- M1182
- uppfærsla:
- síðast þann 24.03.2025
Lýsing
Technical data:
Type: 235 MX
Logs: Up to 19 cm in diameter
Operating hours: Approx. 15
Year of manufacture: 2022
M 1182
Fixed chipper housing
Intake width: 240 mm
Basic weight: approx. 1,370 kg
Equipped with normal cut and power control system
Engine power: 18.5 kW (25.2 HP), EU-V
4-cylinder Kubota Stage V diesel engine
Fully galvanized single-axle chassis (80 km/h)
Towing device with overrun brake, support wheel at the front, parking support at the rear
Dsdpfx Acjvmz Spjzoku
Lighting in accordance with StVZO (impact-protected)
Features:
Logs up to Ø 19 cm: The 235 MX-D is a powerful bush wood chipper that eats through logs with a diameter of up to 19 cm.
Intake width 24 cm: With an intake width of 24 cm, the chipper enables efficient chipping of wood.
Robust construction: The chipper is robustly built and offers a long service life even under demanding conditions in gardening and landscaping.
Engine and chassis:
Water-cooled Stage V 4-cylinder Kubota diesel engine: With 18.5 kW (25.2 HP), the engine offers the necessary power for efficient work.
Industrial freewheel clutch: Automatically acts between the engine and chipping disc to protect the engine, bearings and shaft.
Fully galvanized, corrosion-resistant single-axle chassis: For a speed of up to 80 km/h with EU homologation.
Housing/hopper/blow-out pipe:
Foldable intake hopper: With a minimum input depth of 1,500 mm for easy handling.
Fully galvanized, corrosion-resistant hopper flap: For a long service life and reliable operation.
Chipping mechanism:
Chipping disc Ø 655 mm, 35 mm thick: With a closed knife system for quick, safe and precise knife changes.
Continuously adjustable chipping knives: For individual adaptation to requirements.
Hydraulic feed:
Feed control with its own hydraulic circuit: For precise control of the feed.
PowerGrip feed roller: With hydraulic feed for a grippy, aggressive and even feed.
Safety:
Complies with the safety regulations of DIN-EN 13525: For safe operation and compliance with the relevant standards.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Type: 235 MX
Logs: Up to 19 cm in diameter
Operating hours: Approx. 15
Year of manufacture: 2022
M 1182
Fixed chipper housing
Intake width: 240 mm
Basic weight: approx. 1,370 kg
Equipped with normal cut and power control system
Engine power: 18.5 kW (25.2 HP), EU-V
4-cylinder Kubota Stage V diesel engine
Fully galvanized single-axle chassis (80 km/h)
Towing device with overrun brake, support wheel at the front, parking support at the rear
Dsdpfx Acjvmz Spjzoku
Lighting in accordance with StVZO (impact-protected)
Features:
Logs up to Ø 19 cm: The 235 MX-D is a powerful bush wood chipper that eats through logs with a diameter of up to 19 cm.
Intake width 24 cm: With an intake width of 24 cm, the chipper enables efficient chipping of wood.
Robust construction: The chipper is robustly built and offers a long service life even under demanding conditions in gardening and landscaping.
Engine and chassis:
Water-cooled Stage V 4-cylinder Kubota diesel engine: With 18.5 kW (25.2 HP), the engine offers the necessary power for efficient work.
Industrial freewheel clutch: Automatically acts between the engine and chipping disc to protect the engine, bearings and shaft.
Fully galvanized, corrosion-resistant single-axle chassis: For a speed of up to 80 km/h with EU homologation.
Housing/hopper/blow-out pipe:
Foldable intake hopper: With a minimum input depth of 1,500 mm for easy handling.
Fully galvanized, corrosion-resistant hopper flap: For a long service life and reliable operation.
Chipping mechanism:
Chipping disc Ø 655 mm, 35 mm thick: With a closed knife system for quick, safe and precise knife changes.
Continuously adjustable chipping knives: For individual adaptation to requirements.
Hydraulic feed:
Feed control with its own hydraulic circuit: For precise control of the feed.
PowerGrip feed roller: With hydraulic feed for a grippy, aggressive and even feed.
Safety:
Complies with the safety regulations of DIN-EN 13525: For safe operation and compliance with the relevant standards.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Skjöl
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2023
Senda fyrirspurn
Sími & Fax
+49 5254 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp