3D prentari með hreinsihanskaboxiStratasys
Objet 260 Connex 2
3D prentari með hreinsihanskaboxi
Stratasys
Objet 260 Connex 2
föst verð aukaskattur bætist við
19.500 EUR
Ástand
Notað
Staðsetning
Borken 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- 3D prentari með hreinsihanskaboxi
- framleiðandi:
- Stratasys
- Gerð:
- Objet 260 Connex 2
- Ástand:
- mjög gott (notað)
Verð og staðsetning
föst verð aukaskattur bætist við
19.500 EUR
- Staðsetning:
- Einsteinstraße 8a, 46325 Borken, DE
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A18762511
- Tilvísunarnúmer:
- 24563
- uppfærsla:
- síðast þann 20.03.2025
Lýsing
Objet Stratasys
Model: Objet260 Connex 2
Stratasys Objet260 Connex 2 3D Printer + Cleaning Glovebox
Computer, Monitor, Software: Objet Studio Ver. 9.2.11.6825
The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology
and allow you to combine two or three base resins in a single print run,
allowing you to create prototypes from three materials,
as well as simulate overmolding or populate build plates with selected models.
Using triple-jetting technology, the Objet260 Connex creates prototypes with up to
27 material properties simultaneously in a single part.
The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls.
Model Materials:
Solid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue)
Rubber (Tango family)
Transparent (RGD720 and VeroClear)
Simulated polypropylene (Endur and Durus)
Biocompatible (MED610)
Heat-resistant (RGD525)
Digital Materials:
Digital ABS and Digital ABS2
Wide range of light transmission values
Rubber compounds with a range of Shore A hardnesses
Simulated polypropylene materials with improved heat resistance
Applications:
Visual prototypes
Functional prototypes
Equipment and devices
Architectural models
Medical models
Injection molds
Concept models
Technical specifications:
Build volume:
255 × 252 × 200 mm
Layer thickness:
Ledpfev Rw Etsx Afweah
Horizontal layers of only 16 µm
Resolution:
X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi
Accuracy:
20 to 85 µm for components smaller than 50 mm;
up to 200 µm for the full model size
(only for solid materials, depending on geometry, design parameters, and model orientation)
Size and weight:
870 × 735 × 1200 mm; 410 kg
AC connection:
100–120 VAC, 50–60 Hz, 13.5 A, single-phase
Or
200–240 VAC, 50–60 Hz, 7 A, single-phase
Condition: used
Scope of delivery: (See image)
(Subject to change and errors in the technical specifications, information is subject to change!)
We are happy to answer any further questions you may have over the phone.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Model: Objet260 Connex 2
Stratasys Objet260 Connex 2 3D Printer + Cleaning Glovebox
Computer, Monitor, Software: Objet Studio Ver. 9.2.11.6825
The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology
and allow you to combine two or three base resins in a single print run,
allowing you to create prototypes from three materials,
as well as simulate overmolding or populate build plates with selected models.
Using triple-jetting technology, the Objet260 Connex creates prototypes with up to
27 material properties simultaneously in a single part.
The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls.
Model Materials:
Solid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue)
Rubber (Tango family)
Transparent (RGD720 and VeroClear)
Simulated polypropylene (Endur and Durus)
Biocompatible (MED610)
Heat-resistant (RGD525)
Digital Materials:
Digital ABS and Digital ABS2
Wide range of light transmission values
Rubber compounds with a range of Shore A hardnesses
Simulated polypropylene materials with improved heat resistance
Applications:
Visual prototypes
Functional prototypes
Equipment and devices
Architectural models
Medical models
Injection molds
Concept models
Technical specifications:
Build volume:
255 × 252 × 200 mm
Layer thickness:
Ledpfev Rw Etsx Afweah
Horizontal layers of only 16 µm
Resolution:
X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi
Accuracy:
20 to 85 µm for components smaller than 50 mm;
up to 200 µm for the full model size
(only for solid materials, depending on geometry, design parameters, and model orientation)
Size and weight:
870 × 735 × 1200 mm; 410 kg
AC connection:
100–120 VAC, 50–60 Hz, 13.5 A, single-phase
Or
200–240 VAC, 50–60 Hz, 7 A, single-phase
Condition: used
Scope of delivery: (See image)
(Subject to change and errors in the technical specifications, information is subject to change!)
We are happy to answer any further questions you may have over the phone.
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Senda fyrirspurn
Sími & Fax
+49 2861 ... auglýsingar
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp