Kantslípivél Delle Vedove LBK 2Superfici Elmag
LBK 2
Kantslípivél Delle Vedove LBK 2
Superfici Elmag
LBK 2
framleiðsluár
2002
Ástand
Notað
Staðsetning
Þýskaland 

Myndir sýna
Sýna kort
Upplýsingar um vélina
- Heiti vélar:
- Kantslípivél Delle Vedove LBK 2
- framleiðandi:
- Superfici Elmag
- Gerð:
- LBK 2
- Vélar númer:
- 02062
- framleiðsluár:
- 2002
- Ástand:
- notaður
Verð og staðsetning
- Staðsetning:
- D - Nordrhein-Westfalen
Hringdu
Tilboðsupplýsingar
- Auglýsingarauðkenni:
- A19286536
- Tilvísunarnúmer:
- 3317636
- uppfærsla:
- síðast þann 03.06.2025
Lýsing
The right and left edges are sanded in a single pass.
Hjdpfx Ajwpwuksdkjnu
There are 2 brush sanding heads installed on both the left and right sides.
Process:
1. The parts are conveyed to the right side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction.
2. The right edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt.
3. The parts are conveyed to the left side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction.
4. The left edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt.
- Manufacturer: Supferfici, Delle Vedove
- Part width: approx. 1,400mm
- Height of sanding head: 80mm
- Sanding height: approx. 60mm
- Length: approx. 8,800mm
- Working height: 880mm
- Year of manufacture: 2002
- A new Siemens S7-1200 will be installed for material control.
- Location: in stock
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Hjdpfx Ajwpwuksdkjnu
There are 2 brush sanding heads installed on both the left and right sides.
Process:
1. The parts are conveyed to the right side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction.
2. The right edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt.
3. The parts are conveyed to the left side in the direction of feed via cross belts that are installed at 90 degrees to the feed direction.
4. The left edge is sanded; 2 sanding brush heads are installed, which are adjustable in height and tilt.
- Manufacturer: Supferfici, Delle Vedove
- Part width: approx. 1,400mm
- Height of sanding head: 80mm
- Sanding height: approx. 60mm
- Length: approx. 8,800mm
- Working height: 880mm
- Year of manufacture: 2002
- A new Siemens S7-1200 will be installed for material control.
- Location: in stock
Þessi auglýsing var sjálfvirkt þýdd. Villa í þýðingu gæti verið til staðar.
Bjóðandi
Athugasemd: Skráðu þig ókeypis eða skráðu þig inn, til að fá aðgang að öllum upplýsingum.
Skráð frá: 2002
Senda fyrirspurn
Sími & Fax
+49 5235 ... auglýsingar
Þessar auglýsingar gætu einnig vakið áhuga þinn.
lítil auglýsing

2.142 km
Kantslípivél Delle Vedove LBK 2
Superfici ElmagLBK 2
Superfici ElmagLBK 2
Auglýsingunni þinni hefur verið eytt með góðum árangri
Villa kom upp